G035
User´s Guide
Tungaloy
①
②
①
②
User ’s
Gu ide-
Techn i ca l Reference
Chip shape
Depth of cut: small Depth of cut: large
Description of
chip shape
Acceptability
Effect
Classi-
fication
Shape
A
Shape
B
Shape
C
Shape
D
Shape
E
Chips irregularly
entangled
• Wrapping around the tool or workpiece
or accumulation around the cutting
point, hindering cutting
• Possible damage to the machined surface
Long continuous
spiral chips
R
50 mm
Short spiral chips
R
50 mm
"C" or "9" shaped
chips (Around one
coiling)
Excessively broken
chips. Thin pieces or
connected in a form
of wave as shown in
the figure left
• Bulky during transport in the automatic
line
• May be preferred when one operator
handles one machine
• Smooth chip flow
• Difficult to scatter
• Favorable shape
• Favorable shape if not scattering
• Not bulky and easy to transport
• Readily scattering. If scattering is the only
trouble, it may be acceptable because the
chip cover, etc. may be used.
• Tend to cause chatter, causing harm on the
finished surface roughness or tool life.
Acceptable
Not acceptable
Not acceptable
Chip cont rol l abi l i ty
Necessity of chip control
Why is chip control needed?
Effect of improper chip control
Why is chip control needed?
What is chip?
For making a product from a workpiece, removed
objects produced by a tool which is set to cut to a
specified depth with the relative motion of the tool
and the workpiece.
Problems when chips
are not properly
controlled
Necessity of chip control (Problems and effects)
Problems
Effects
1. Scattering of chips and
coolant.
2. Wrapping around the
workpiece and the tool.
3. Accumulation on the tool, jig,
and machining facilities.
1.
Disturbs unmanned and automated machining.
2.
Disturbs high-speed and high-efficiency machining.
3. Degrades finished surface.
4. Threatens operator’s safety.
5. Reduced operation rate.
Additional problems when
chips are not properly
controlled
Effects on quality
Effects on operation
Effect on safety
and health.
• Defective work.
• Defective surface finish
• Chip entangling
•
Increased number of man-hours for handling.
• Increased tool costs.
• Troublesome chip handling.
•
Machine stoppage and reduced operation rate.
•
Stain and damage on machine caused
from improper carrying-out of chips.
•
Dangerous effects on the human body.
(Injury and burns on hand, etc.)
Effective measures
“Chipbreaker”
Effect of improper chip control
Chipbreakers