G034
User´s Guide
User ’s
Gu ide-
Techn i ca l Reference
Problem
Countermeasure
Tool
Cause
Deteriorated surface roughness
Deteriorated
dimensional
accuracy
Burr occurrence
Edge breakout
Fuzzy surface finish
• Select a more wear resistant grade
• Use an insert with a larger rake angle
• Use an insert with a larger nose radius
• Use a more lightly honed insert
• Use an insert of closer tolerance (from M
class to G class)
• Increased tool wear
• Select a proper feed
• Decrease the cutting speed
• Select a freer-cutting chipbreaker type
• Use a cutting fluid
• Use a tougher grade
• Select a chipbreaker with strong cutting
edges
• Use a largely honed insert
• Increase the side cutting edge angle
• Use a larger shank size
• Edge chipping
• Decrease the depth of cut
• Decrease the feed
• Use a more rigid machine
• Improve the holding rigidity of the tool and
workpiece
• Shorten the overhang of the toolholder
• Improve the machine looseness
• Select a grade with less affinity with the
Workpiece material
• Use an insert with a larger rake angle
• Select a freer-cutting chipbreaker type
• Use a more lightly honed insert
• Use an insert of closer tolerance (from M class to
G class)
• Chip welding
• Built-up-edge
• Increase the cutting speed
• Increase the feed
• Use a water-insoluble cutting fluid
• Use a cutting fluid
• Use a tougher grade
• Use an insert with a larger rake angle
• Select a freer-cutting chipbreaker type
• Use an insert with a smaller nose radius
• Decrease the side cutting edge angle
• Use a more lightly honed insert
• Use a larger shank size
• Vibration and chatter
• Use a proper cutting speed
• Decrease the feed
• Decrease the depth of cut
• Improve the holding rigidity of the tool and
workpiece
• Shorten the overhang of the toolholder
• Improve the machine looseness
• Use an insert of closer tolerance
(from M class to G class)
• Improper insert accuracy
• Use an insert with a larger rake angle
• Select a freer-cutting chipbreaker type
• Use an insert with a smaller nose radius
• Use a more lightly honed insert
• Incomplete engagement
of tool and workpiece
• Improve the holding rigidity of the tool and
workpiece
• Shorten the overhang of the toolholder
• Improve the machine looseness
• Decrease the cutting speed
• Increase the feed
• Use a cutting fluid
• Unsuitable cutting speed
• Use a harder grade
• Use an insert with a larger rake angle
• Select a freer-cutting chipbreaker type
• Increase the relief angle
• Use an insert with a smaller nose radius
• Decrease the side cutting edge angle
• Use a more lightly honed insert
• Worn tool or improper
cutting edge geometry
• Decrease the feed
• Decrease the depth of cut
• Improper cutting speed
• Use a harder grade
• Use an insert with a larger rake angle
• Select a freer-cutting chipbreaker type
• Increase the side cutting edge angle
• Use an insert with a larger nose radius
• Use a more lightly honed insert
• Use a larger shank size
• Worn tool or improper
cutting edge geometry
• Improve the holding rigidity of the tool and
workpiece
• Shorten the overhang of the toolholder
• Improve the machine looseness
• Increase the cutting speed
• Select a proper feed
• Use a water-insoluble cutting fluid
• Use a cutting fluid
• Improper cutting
conditions
• Use a harder grade.
• Select a grade with less affinity with the
Workpiece material
• Use an insert with a larger rake angle
• Select a freer-cutting chipbreaker type
• Use a more lightly honed insert
• Worn tool or improper
cutting edge geometry
Turning Tool s
Cutting conditions and others