Unknown - page 704

D112
Shoulder Milling
STANDARD CUTTING CONDITIONS
ISO Workpiece material
Grade
Cutting speed Vc (m/min)
Feed per tooth fz (mm/t)
Mild steels
Unhardened steels
< 180 HB
T3130
60 ~ 180
0.05 ~ 0.2
NS740 « N308
60 ~ 150
0.05 ~ 0.15
AH130 « GH330 « UX30
60 ~ 130
0.05 ~ 0.2
Carbon steels
Alloy steels
< 300 HB
T3130
60 ~ 150
0.05 ~ 0.18
UX30 « AH120
60 ~ 130
0.05 ~ 0.18
NS740 « N308
60 ~ 130
0.05 ~ 0.15
Die steels
< 30 HRC
T3130 « UX30 « AH120
80 ~ 130
0.05 ~ 0.2
NS740 « N308
60 ~ 130
0.05 ~ 0.15
Stainless steels
< 250 HB
AH130 « AH140
100 ~ 180
0.08 ~ 0.2
AH120 « GH330
100 ~ 200
0.08 ~ 0.2
TU40
80 ~ 130
0.08 ~ 0.2
Cast irons
T1115
100 ~ 150
0.05 ~ 0.2
Aluminium alloys
TH10
200 ~ 400
0.05 ~ 0.2
ISO Workpiece material
Grade
Roughing
(Depth of cut: > 1.5 mm)
Finishing
(Depth of cut: 0.3 ~ 0.7 mm)
Cutting speed
Vc (m/min)
Feed per tooth
fz (mm/t)
Cutting speed
Vc (m/min)
Feed per tooth
fz (mm/t)
Mild steels
Unhardened steels
< 180 HB
AH120 « GH330
130 ~ 230
0.1 ~ 0.2
130 ~ 250
0.1 ~ 0.23
T3130
130 ~ 300
0.1 ~ 0.23
150 ~ 300
0.1 ~ 0.25
NS740 « N308
130 ~ 200
0.1 ~ 0.18
150 ~ 250
0.1 ~ 0.2
UX30 « AH130
100 ~ 180
0.1 ~ 0.2
130 ~ 200
0.1 ~ 0.23
Carbon steels
Alloy steels
< 300 HB
AH120 « GH330
100 ~ 200
0.1 ~ 0.18
130 ~ 230
0.1 ~ 0.2
T3130
130 ~ 280
0.1 ~ 0.2
180 ~ 280
0.1 ~ 0.23
NS740 « N308
100 ~ 150
0.1 ~ 0.15
150 ~ 200
0.1 ~ 0.18
UX30
80 ~ 130
0.1 ~ 0.18
100 ~ 150
0.1 ~ 0.2
Die steels
< 30 HRC
T3130 « AH120
100 ~ 150
0.1 ~ 0.15
100 ~ 150
0.1 ~ 0.2
UX30
80 ~ 130
0.1 ~ 0.15
80 ~ 130
0.1 ~ 0.2
Stainless steels
< 250 HB
AH130 « AH140
80 ~ 180
0.1 ~ 0.2
100 ~ 200
0.1 ~ 0.25
AH120 « GH330
150 ~ 200
0.1 ~ 0.18
200 ~ 250
0.1 ~ 0.25
Cast irons
T1115
100 ~ 200
0.1 ~ 0.2
100 ~ 200
0.1 ~ 0.2
TH10
80 ~ 130
0.1 ~ 0.2
80 ~ 130
0.1 ~ 0.25
Aluminium alloys
Si < 13%
TH10
200 ~ 1000
0.05 ~ 0.25
350 ~ 1000
0.1 ~ 0.25
DX140
200 ~ 1000
0.05 ~ 0.15
350 ~ 1000
0.1 ~ 0.2
Copper alloys
TH10
200 ~ 500
0.1 ~ 0.15
200 ~ 500
0.1 ~ 0.2
Note:
• Dry cutting is recommended except for aluminium alloys
• Maximum depth of cut for TECN32ZFR-DIA is 2.5 mm.
• When wet machining mild steels, carbon steels and alloy steels, use T3130 at lower cutting conditions.
Appli ed to cut ter di a. ≤ ø40 mm
Appli ed to cut ter di a. ≥ ø50 mm
1...,694,695,696,697,698,699,700,701,702,703 705,706,707,708,709,710,711,712,713,714,...1348
Powered by FlippingBook