E051
Tungaloy
2-e ective Drill
P
°
L
øDs
0
0.006 -
øDc
0
0.006 -
Designation
øD
c
YH170
øD
s
L
P°
DSM-CP90
3
●
3
38.1
90
DSM-CP140
3
●
3
38.1
140
DSM-CP
Centering drill for DSM
ISO
Workpiece material
Cutting speed: Vc (m/min)
Feed: f (mm/rev)
DSM-CP90
DSM-CP140
Carbon, Mild and Alloy steels
30 - 80
0.01 - 0.06
0.03 - 0.08
Grey and ductile cast irons
30 - 80
0.02 - 0.06
0.05 - 0.1
Aluminium alloys
60 - 120
0.02 - 0.1
0.05 -
0.15
Stainless steels
15 - 40
0.01 - 0.03
0.02 - 0.06
High hardened steels (~45HRC)
10 - 40
Not recommended
0.01 - 0.05
Notes: • For hard materials and stainless steels which have work-hardening nature, DSM-CP140 is recommended.
• Above cutting conditions are of using a water-soluble cutting fluid. When using a water-insoluble type, set the cutting speed to lower side.
STANDARD CUTTING CONDITIONS
: Line-up