Unknown - page 758

D166
Face Milling
STANDARD CUTTING CONDITIONS
Depth of cut: 0.4 ~ 1 Depth of cut: 1.5 ~ 3 Depth of cut: 4 ~ 6
ISO Workpiece material
Grade
Cutting speed
Vc (m/min)
Feed per tooth
fz (mm/t)
Feed per tooth
fz (mm/t)
Feed per tooth
fz (mm/t)
Carbon steels,
alloy steels
< 300HB
AH120
150 ~ 250
0.3 ~ 0.5
0.2 ~ 0.3
0.1 ~ 0.2
UX30
80 ~ 150
0.3 ~ 0.6
0.2 ~ 0.3
0.1 ~ 0.2
Die steels
< 30HRC
AH120
100 ~ 150
0.2 ~ 0.4
0.15 ~ 0.3
0.1 ~ 0.2
UX30
80 ~ 130
0.25 ~ 0.5
0.15 ~ 0.3
0.1 ~ 0.2
Grey cast irons,
ductile cast irons
AH120
100 ~ 150
0.3 ~ 0.6
0.2 ~ 0.4
0.1 ~ 0.25
TH10
80 ~ 130
0.3 ~ 0.6
0.2 ~ 0.4
0.1 ~ 0.25
Hardened steels
40 ~ 55HRC
AH120
20 ~ 60
0.1 ~ 0.2
0.05 ~ 0.2
-
UX30
20 ~ 60
0.1 ~ 0.2
0.05 ~ 0.2
-
Note: Feed rate should be inversely proportional to depth of cut and selected depending on machine rigidity.
1...,748,749,750,751,752,753,754,755,756,757 759,760,761,762,763,764,765,766,767,768,...1348
Powered by FlippingBook