Unknown - page 755

D163
Tungaloy
Face Milling
STANDARD CUTTING CONDITIONS
ISO Workpiece
material
Grade
Roughing (Depth of cut: 1.5 ~ 4 mm)
Finishing (Depth of cut: 0.3 ~ 0.7 mm)
Cutting speed Vc (m/min)
Feed per tooth fz (mm/t)
Cutting speed Vc (m/min)
Feed per tooth fz (mm/t)
Mild steels
Unhardened steels
< 180 HB
T3130
150 ~ 250
0.1 ~ 0.3
180 ~ 250
0.1 ~ 0.3
NS740 œ N308
100 ~ 200
0.1 ~ 0.2
150 ~ 250
0.1 ~ 0.25
UX30
100 ~ 180
0.1 ~ 0.3
130 ~ 200
0.1 ~ 0.3
Carbon steels
Alloy steels
< 300 HB
T3130
130 ~ 250
0.1 ~ 0.3
150 ~ 250
0.1 ~ 0.3
NS740 œ N308
100 ~ 180
0.1 ~ 0.2
150 ~ 200
0.1 ~ 0.25
UX30
80 ~ 130
0.1 ~ 0.3
100 ~ 150
0.1 ~ 0.3
Cast irons
Ductile cast irons
TH10 œ UX30
80 ~ 130
0.1 ~ 0.25
80 ~ 130
0.1 ~ 0.3
T1115
100 ~ 200
0.1 ~ 0.2
100 ~ 200
0.1 ~ 0.25
FX105
200 ~ 500
0.1 ~ 0.35
200 ~ 600
0.1 ~ 0.4
Notes:
• Dry cutting is recommended for above materials.
• When wet machining mild steels, carbon steels and alloy steels, use T3130 at lower cutting conditions.
1...,745,746,747,748,749,750,751,752,753,754 756,757,758,759,760,761,762,763,764,765,...1348
Powered by FlippingBook