D142
Face Milling
Notes:
• In milling aluminium and copper alloys:
(1) For improved surface finish, use together with wiper insert
SEGW12X4ZEFR-WD
(2) For reducing burr occurrence, use together with deburring inserts
SEGW12X4ZEFR-BD
• When milling aluminium and copper alloys, use of a water soluble cutting
fluid is recommended. When milling steels, cast irons, and stainless steels,
dry cutting is recommended.
• When the length-to-diameter overhang ratio of the tool (L/D) exceeds 3, re-
duce cutting speed and feed to 70 to 80% of the values given in the table.
ISO
Workpiece material
Grade
Designation
Cutting speed
Vc (m/min)
Feed per tooth
fz (mm/t)
Carbon steels and alloy steels
< 300HB
AH120
SEGW12X4ZEPR
100 ~ 180
0.03 ~ 0.15
NS740
SEGW12X4ZEPR
100 ~ 180
0.03 ~ 0.15
Stainless steels
< 250HB
AH140
SEGW12X4ZEPR
80 ~ 180
0.03 ~ 0.15
Grey and ductile cast irons
AH120
SEGW12X4ZEPR
100 ~ 200
0.03 ~ 0.15
Cast aluminium alloy / Die-cast
Si < 13%
KS05F
SEGT12X4ZEFR-AJ
200 ~ 1500
0.05 ~ 0.2
DX140
SEGW12X4ZEFR-D
200 ~ 1500
0.05 ~ 0.2
Cast aluminium alloy / Die-cast
Si ≥ 13%
KS05F
SEGT12X4ZEFR-AJ
80 ~ 200
0.05 ~ 0.2
DX140
SEGW12X4ZEFR-D
200 ~ 500
0.05 ~ 0.2
Aluminium alloy
Tensile strength < 350 N/mm
2
KS05F
SEGT12X4ZEFR-AJ
200 ~ 1500
0.05 ~ 0.2
DX140
SEGW12X4ZEFR-D
200 ~ 1500
0.05 ~ 0.2
Aluminium alloy
Tensile strength > 350 N/mm
2
KS05F
SEGW12X4ZEFR
200 ~ 1500
0.05 ~ 0.2
DX140
SEGW12X4ZEFR-D
200 ~ 1500
0.05 ~ 0.2
Copper alloy
KS05F
SEGT12X4ZEFR-AJ
200 ~ 500
0.05 ~ 0.2
DX140
SEGW12X4ZEFR-D
200 ~ 500
0.05 ~ 0.2
STANDARD CUTTING CONDITIONS