Unknown - page 839

D247
Tungaloy
Multi Function
STANDARD CUTTING CONDITIONS
ISO
Workpiece material
Hardness
HB
VST type
VTB type
Cutting speed
Vc (m/min)
Feed per tooth
fz (mm/t)
Cutting speed
Vc (m/min)
Feed per tooth
fz (mm/t)
Low carbon steels
C45, C55, etc.
- 300
80 - 180
0.05 - 0.15
80 - 180
0.08 - 0.18
High carbon steels
42CrMo4, 15Cr3, etc.
- 300
60 - 120
0.04 - 0.12
60 - 120
0.05 - 0.15
Stainless steels
X5CrNi18-9, X5CrNiMo17-12-2, etc.
- 200
50 - 120
0.04 - 0.12
50 - 120
0.05 - 0.15
Grey cast irons
250, 300, etc.
150 - 250
100 - 200
0.05 - 0.15
100 - 200
0.08 - 0.18
Ductile cast irons
400-15S, etc.
150 - 250
100 - 200
0.04 - 0.12
100 - 200
0.05 - 0.15
Aluminium alloys
Si < 13%
-
200 - 600
0.05 - 0.15
200 - 600
0.08 - 0.18
Aluminium alloys
Si ≥13%
-
100 - 300
0.03 - 0.13
100 - 300
0.05 - 0.15
Titanium alloys
Ti-6Al-4V, etc.
-
40 - 60
0.04 - 0.12
40 - 60
0.05 - 0.15
Heat-resistant alloys
Inconel 718, etc.
-
15 - 35
0.02 - 0.1
15 - 35
0.02 - 0.1
Slotting (VST, VTB)
1...,829,830,831,832,833,834,835,836,837,838 840,841,842,843,844,845,846,847,848,849,...1348
Powered by FlippingBook