Unknown - page 778

D186
Slot Milling
STANDARD CUTTING CONDITIONS
Note: SVN4000 type TAC mills should be used only for roughing. Attainable accuracy of groove width is ±0.1 mm.
• No. of revolutions n (min
-1
) = Cutting speed Vc (m/min)
1000 ÷ 3.14 ÷ Cutter ø (mm)
• Feed speed Vf (mm/min) = n (min
-1
)
Feed per tooth fz (mm/t)
z (No. of inserts)
ISO
Workpiece material
Grade
Cutting speed Vc (m/min)
Carbon steels < 300 HB
UX30
80 ~ 120
Die steels < 300 HB
UX30
60 ~ 80
Cast irons
TH10
80 ~ 100
Aluminium alloys
TH10
600 ~ 1000
1...,768,769,770,771,772,773,774,775,776,777 779,780,781,782,783,784,785,786,787,788,...1348
Powered by FlippingBook