B160
65
60
55
50
45
0.10
15
10
5
0
0.08
0.06
0.04
0.02
0
10
20
30
100
19
14
10
0
300
200
100
0
0.15
0.3
0
300
200
100
1-2µm
4-8µm
T-CBN
BXM10
BXM20
BXA20
BX310
BX330
BX360
BX380
BXM10
BXM10
BXM20
BXM20
BXA20
BXA20
BX360
5.5
4
2.5
BX330
Insert
PCD / CBN
T-CBN series for machining hardened steels and hard materials
Application area
Necessity of PCBN grades
Workpiece hardness (HRC)
Ceramic
Coated / Cermet
Continuous
Light
interrupted
Cutting mode
Heavy
interrupted
The condition
necessary to cut
the work
material is:
Hardness of tool
≥
Hardness of tool X 3
Hardened steel (60HRC)
¹
700 Hv Cemented carbide
¹
1600 Hv
PCBN (BX360)
¹
3300 Hv
Effects of grain size of CBN on surface roughness and cutting speed
[Fine-grained CBN]
[Rough-grained CBN]
Fine grained PCBN provided with
sharp cutting edge.
Rough grained PCBN. CBN particles
are hold firmly.
Good surface roughness
Allows high speed machining
Increasing
Features of CBN grades for
machining hardened steel and
other hard materials
Impact
resistance
Wear
resistance
CBN content
Fewer CBN content
e
Increasing wear resistance
Much CBN content
e
Increasing impact resistance
Basic selection of T-CBN grades in machining of hardened steel and hard material
Coated T-CBN grades
For high speeds cutting
For general purpose,
more than
V
c = 180 m/min
For general purpose,
less than
V
c = 180 m/min
Uncoated T-CBN grades
For high speeds / Priority on wear resistance in continuous cutting
For medium speeds / Priority on surface quality
For low to medium speeds / General purpose grade, excels in
impact resistance
For low to medium speeds / Priority on impact
resistance in heavily interrupted cutting
Application area of coated T-CBN grades
Continuous cutting
Cutting speed
V
c
(m/min)
Continuous
cutting
Cutting speed
V
c
(m/min)
Interrupted cutting
Lightly
interrupted
Light
Interrupted
Interrupted
Feed rate (mm/vev)
Heavy
Effects of Coated T-CBN grades
Coated on hard CBN
Hardness:
CBN > Coating layer
Protect CBN from oxidation wear
Since the coating layer intercepts air, oxidation wear of
CBN can be prevented.
Peeling of coating layer can be protected
Hard and deformation resistant CBN is excellent substrate
material.
Improved resistance
to flank wear
Effects of coolant in machining of hardened steel
Continuous cutting
Flank wear width VB (mm)
Time in cut (min)
Dry
Wet
Continuous
cutting
Cutting conditions
Workpiece material: Chromium
molybdenum steel
(JIS SCM415), 60 HRC
Cutting speed:
V
c = 150 m/min
Depth of cut:
a
p = 0.25 mm
Feed:
f
= 0.1 mm/rev
Cutting conditions
Workpiece material: Chromium
molybdenum steel
(JIS SCM415), 60 HRC
Cutting speed:
V
c = 100 m/min
Depth of cut:
a
p = 0.25 mm
Feed:
f
= 0.15 mm/rev
Interrupted cutting
Tool life (min)
Dry
Wet
Heavy
interrupted
In continuous cutting, wet
cutting is superior to dry
cutting in tool life for wear.
In interrupted cutting, dry
cutting is superior to wet
cutting in tool life for
fracture.