Rz
JIS
Rz
Ra
G068
User´s Guide
User ’s
Gu ide-
Techn i ca l Reference
(According to JIS B 0601, 2001 and its explanation.)
Rz
JIS
shall be that only the reference length is
sampled from the roughness curve in the direction
of its mean line, the sum of the average value of
absolute values of the heights of five highest
profile peaks (
Zp
) and the depths of five deepest
profile valleys (
Zv
) measured in the vertical
magnification direction from the mean line of this
sampled portion and this sum is expressed in
micrometer (
µ
m)
Ra
means the value obtained by the following
formula and expressed in micrometer (
µ
m) when
sampling only the reference length from the
roughness curve in the direction of mean line,
taking X-axis in the direction of mean line and Y-axis
in the direction of longitudinal magnification of
this sampled part and the roughness curve is
expressed by
y- f (
x
)
:
where,
R
: reference length
Rz
shall be that only the reference length is
sampled from the roughness curve in the direction
of mean line, the distance between the top of
profile peak line and the bottom of profile valley
line on this sampled portion is measured in the
longitudinal magnification direction of roughness
curve and the obtained value is expressed in
micrometer (
µ
m).
Type Symbol
How to determine
Example (Fig.)
Arithmetic mean roughness
Maximum height
Ten point mean roughness
where,
Z
p1
, Z
p2
, Z
p3
, Z
p4
, Z
p5
: altitudes of the heights of five highest profile
peaks of the sampled portion corresponding
to the reference length
R
where,
Z
v1
, Z
v2
, Z
v3
, Z
v4
, Z
v5
: altitudes of the depths of five deepest profile
valleys of the sampled portion corresponding
to the reference length
R
Sur face Roughness