E117
Tungaloy
Deep Hole Drill
ø
D
c (mm)
Single Tube System
(
STS
)
The STS may also be referred to as the BTA sys-
tem in the deep hole drilling process.
A large volume of coolant is pumped under high
pressure to the cutting area in the workpiece.
Chips are then forced out through the drill tube at
the back and they do not touch workpiece allowing
super surface finish. STS is a very good method to
obtain holes of high productivity and high accuracy
by using a dedicated drilling machine and a sealing
with the workpiece.
Single Tube System (STS) and Double Tube System (DTS)
Double Tube System (DTS)
The DTS is characterized by its two tube construc-
tion and is therefore known as the double tube sys-
tem. A sealing system and pressure head, which
is required in the Single Tube System (STS) is not
necessary for the DTS and it is therefore suitable
for conventional general purpose machines such
as lathes or machining centers.
In general, because of less efficient chip evacua-
tion than the STS the recommended max drilling
depth is 1000mm. However, the unique DTC-R
tube connector that is capable of supplying high
pressure coolant can successfully achieve drilling
depths of up to 2000mm.
Workpiece
material
Drill head
Drill tube
Guide bush
Seal
Chip box
Double tube con-
nector
Oil pressure head
Outer tube
Inner tube
No need for
seal
Workpiece
material
Drill head
BTA tool product map
Brazed Drill Head
Indexable Drill
Head
Direct Mount Drill
Head
Tool diameter precision
Tool dia.
Deep hole dr i l l ing head ser ies
Guide bush