Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/197 Design: Double neodymium magnetic clamping system with a steel base body. The upper plate can be machined up to a depth of 6 mm without impairing the holding force. The clamping plate is activated using a detachable hexagonal control lever. Optionally, pole strips can be mounted, which make it possible to raise the workpiece. Reference elements can be directly absorbed by the width extension so no additional pallet is required under the magnet. Retaining force: approx. 160 N/cm2 Magnetic field height: approx. 10 mm Transverse pole pitch: 11 + 4 mm Application: For clamping workpieces for heavy machining, even on rough surfaces, good holding forces are achieved. Note: Workpieces from 30 x 15 x 6 mm can be clamped with the maximum achievable holding force. Permanent magnetic clamping plate, PMNEO for palletising Length mm Width mm Height mm Corner chamfer 45° mm Weight kg 3410 Order No. € 240 240 48 10 19 C◊ …0079 280 280 48 10 28 C◊ B …0082 320 320 48 40 35 C◊ B …0085 400 400 48 40 50 C◊ …0088 (W350) Further dimensions available on request. Design: Very precise sine table with built-in permanent magnetic fine pole pitch clamping plate. Body hardened to 60 HRC, burnished and precision ground. Swivelling in the longitudinal axis by up to 45°. Angle adjustment according to the sine principle with the aid of gauge blocks. The upper plate can be machined up to a depth of 5 mm without impairing the holding force. Retaining force: approx. 100 N/cm2 Magnetic field height: approx. 5 mm Plane-parallelism: 0.005/100 mm Angular accuracy: ±0.0013°/±5 sec Application: For clamping workpieces during eroding, grinding and measuring with the highest precision. Table size A x B mm Base area C x D mm Height E mm Dimension F mm Weight kg 3411 Order No. € 250 x 150 290 x 165 79 135 21.5 C◊ …0250 300 x 150 340 x 165 79 135 27 C◊ …0300 400 x 200 440 x 215 88 185 52 C◊ …0400 (W350) Precision sine table B F D A C E Magnetic prisms For measuring, grinding, eroding and mounting. Also use directly on the magnetic chuck without losing its holding force. Ç 3/200 Magnetic clamping devices 3.89
RkJQdWJsaXNoZXIy NTg4MTI=