FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/196 Design: Neodymium magnetic clamping system with a steel base body. The low magnetic field height of about 5 mm prevents magnetisation of the machining tools. The upper plate can be machined up to a depth of 6 mm without impairing the holding force. The clamping plate is activated using a detachable hexagonal control lever. Retaining force: approx. 100 N/cm2 Magnetic field height: approx. 5 mm Transverse pole pitch: 1.4 + 0.5 mm Application: For high-precision clamping of small and thin workpieces for grinding or eroding. Note: For all magnetic clamping plates, a flushing bore can be introduced into the pole plate. Length mm Width mm Height mm Weight kg 3410 Order No. € 100 70 48 3 C◊ …0001 100 150 48 6 C◊ …0004 150 150 51 9 C◊ …0007 175 100 48 7 405.00 …0010 255 130 48 13 623.50 …0013 250 150 51 16 688.50 …0016 300 150 51 19 802.00 …0019 ​ (W350) Length mm Width mm Height mm Weight kg 3410 Order No. € 350 150 51 22 1012.00 …0022 400 150 51 25 C◊ …0025 400 200 51 33 1434.00 B …0028 500 200 51 41 C◊ B …0031 500 300 56 67 C◊ …0034 600 200 51 49 C◊ …0037 600 300 56 81 C◊ …0040 ​ (W350) Permanent magnetic clamping plate Further dimensions available on request. Design: Neodymium magnetic clamping system with a steel base body. The low height of only 40 mm is particularly suitable for mounting on standard pallets. The low magnetic field height of about 5 mm prevents magnetisation of the machining tools. The upper plate can be machined up to a depth of 6 mm without impairing the holding force. The clamping plate is activated using a detachable hexagonal control lever. Retaining force: approx. 100 N/cm2 Magnetic field height: approx. 5 mm Transverse pole pitch: 1.4 + 0.5 mm Application: For high-precision clamping of small and thin workpieces for grinding or eroding. Note: For all magnetic clamping plates, a flushing bore can be introduced into the pole plate. Length mm Width mm Height mm Corner chamfer 45° mm Weight kg 3410 Order No. € 240 240 40 10 18 C◊ B …0043 280 280 40 10 25 C◊ B …0046 ​ (W350) Permanent magnetic clamping plate, for palletising Further dimensions available on request. Design: Double neodymium magnetic clamping system with a steel base body. The upper plate can be machined up to a depth of 6 mm without impairing the holding force. The clamping plate is activated using a detachable hexagonal control lever. Retaining force: approx. 160 N/cm2 Magnetic field height: approx. 10 mm Transverse pole pitch: 11 + 3 mm Application: For clamping workpieces for heavy machining, even on rough surfaces, good holding forces are achieved. Note: Workpieces from 30 x 15 x 6 mm can be clamped with the maximum achievable holding force. Length mm Width mm Height mm Weight kg 3410 Order No. € 250 150 56 17 1215.00 …0052 300 150 56 18 1336.00 …0055 300 200 56 26 C◊ …0058 350 150 56 24 1490.00 …0061 400 200 56 35 1847.00 B …0064 ​ (W350) Length mm Width mm Height mm Weight kg 3410 Order No. € 500 200 56 44 C◊ B …0067 500 300 56 56 2981.00 B …0070 600 200 56 52 C◊ …0073 600 300 56 78 C◊ …0076 ​ (W350) Permanent magnetic clamping plate, PMNEO Further dimensions available on request. Magnetic clamping devices 3.89

RkJQdWJsaXNoZXIy NTg4MTI=