All prices quoted are non-binding recommended prices. 3/198 Design: Magnetic round chuck with neodymium magnetic system with a steel base body. The magnetic force is continuously adjustable. The integrated centring grooves in the surface facilitate alignment of the workpieces. In addition, a centring hole can be introduced into the clamping surface. The upper plate can be machined up to a depth of 4 mm without impairing the holding force. Retaining force: approx. 80 N/cm2 Magnetic field height: approx. 4 mm Max. pole pitch: 1.5 + 0.5 mm Application: For clamping small workpieces during turning. ∅ A mm Height B mm ∅ C mm Dimension D mm Drilled holes max. rpm rpm Weight kg 3413 Order No. € 80 50 50 3 3 x M5 1500 1.8 364.50 …0001 100 50 60 4 4 x M8 1500 3 413.00 …0004 130 50 90 4 4 x M8 1200 5 542.50 …0007 160 50 120 4 4 x M8 1000 9 688.50 …0010 (W350) Permanent magnetic round chuck, RNF Design: Magnetic round chuck with reinforced, ceramic magnet system and an aluminium base body. The magnetic force is continuously adjustable. The integrated centring grooves in the surface facilitate alignment of the workpieces. In addition, a centring hole can be introduced into the clamping surface. The upper plate can be machined up to a depth of 8 mm without impairing the holding force. Retaining force: approx. 140 N/cm2 Magnetic field height: approx. 8 mm Max. pole pitch: 5 + 8 mm Application: For clamping of workpieces during turning, also for large parts. ∅ A mm Height B mm ∅ C mm Dimension D mm ∅ E mm Drilled holes max. rpm rpm Weight kg 3414 Order No. € 200 80 150 4.5 182 4 x M8 800 13 1304.00 …0001 250 80 200 4.5 232 4 x M8 700 20 1660.00 …0004 300 85 250 4.5 285 4 x M8 700 27 2244.00 …0007 400 100 300 5 350 6 x M10 500 56 C◊ B …0010 (W350) Permanent magnetic round chuck, RM Magnetic clamping devices 3.89
RkJQdWJsaXNoZXIy NTg4MTI=