All prices quoted are non-binding recommended prices. 3/100 Design: With steep taper shank. Application: Can be used for right-hand and left-hand threads for both horizontal and vertical machining on CNC machining centres, special and drilling machines. Cutting of the tap due to differences between the tap pitch and the machine feed is prevented by the length compensation on compression and tension. The use of a longitudinal ball bearing guide in the length compensation makes the feed particularly durable and smooth-running at high torques. for taps SK For insert type Insert ∅ d1 mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d2 mm Projection length l1 mm G 3331 Order No. € M3 –M12 40 FE 1/FES 1 19 7.5 7.5 38 60 M16 267.00 …0001 M6 –M20 40 FE 2/FES 2 31 12.5 12.5 55 100 M16 300.00 …0004 M14–M33 40 FE 3/FES 3 48 24 24 79 138 M16 529.50 …0007 M3 –M12 50 FE 1/FES 1 19 7.5 7.5 38 62 M24 313.00 …0010 M6 –M20 50 FE 2/FES 2 31 12.5 12.5 55 83 M24 346.00 …0013 M14–M33 50 FE 3/FES 3 48 24 24 79 133 M24 582.50 …0016 (W347) Thread tapping quick-exchange chuck, with elastic length compensation ISO 7388-1 A Design: With steep taper shank. Application: Can be used for right-hand and left-hand threads for both horizontal and vertical machining on CNC machining centres, special and drilling machines. Cutting of the tap due to differences between the tap pitch and the machine feed is prevented by the length compensation on compression and tension. The use of a longitudinal ball bearing guide in the length compensation makes the feed particularly durable and smooth-running at high torques. Note: Quick-exchange insert FE for tapping quick-exchange chuck (Order No. 3344 0001) Ç 3/102. for taps SK For insert type Insert ∅ mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d1 mm Projection length l1 mm 3332 Order No. € M3 –M12 40 FE 1/FES 1 19 7 7 38 59 162.00 …0001 M6 –M20 40 FE 2/FES 2 31 12 12 54 97 207.50 …0004 M14–M33 40 FE 3/FES 3 48 17.5 17.5 78 156 263.50 …0007 M3 –M12 50 FE 1/FES 1 19 7 7 38 63 268.00 …0010 M6 –M20 50 FE 2/FES 2 31 12 12 55 97 302.00 …0013 M14–M33 50 FE 3/FES 3 48 17.5 17.5 78 140 423.50 …0016 (W065) Thread tapping quick-exchange chuck, with elastic length compensation ISO 7388-1 A Design: With steep taper shank. Application: Can be used for right-hand and left-hand threads for both horizontal and vertical machining on CNC machining centres, special and drilling machines. Cutting of the tap due to differences between the tap pitch and the machine feed is prevented by the length compensation on compression and tension. The use of a longitudinal ball bearing guide in the length compensation makes the feed particularly durable and smooth-running at high torques. for taps BT For insert type Insert ∅ d1 mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d1 mm Projection length l1 mm G 3334 Order No. € M3 –M12 40 FE 1/FES 1 19 7.5 7.5 38 60 M16 259.50 …0001 M6 –M20 40 FE 2/FES 2 31 12.5 12.5 55 100 M16 302.50 …0004 M14–M33 40 FE 3/FES 3 48 20 20 78 162.5 M16 532.00 …0007 M3 –M12 50 FE 1/FES 1 19 7.5 7.5 38 62 M24 319.50 …0010 M14–M33 50 FE 2/FES 2 31 12.5 12.5 55 100 M24 351.50 …0013 M14–M33 50 FE 3/FES 3 48 20 20 78 141 M24 579.00 …0016 (W347) Thread tapping quick-exchange chuck, with elastic length compensation ISO 7388-2 A l d d G 1 1 2 d1 l 1 l d d G 1 1 2 Tapping chucks 3.4
RkJQdWJsaXNoZXIy NTg4MTI=