Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/101 Design: With steep taper shank. Note: Quick-exchange insert FE for tapping quick-exchange chuck (Order No. 3344 0001) Ç 3/102. for taps BT For insert type Insert ∅ mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d1 mm Projection length l1 mm 3335 Order No. € M3 –M12 40 FE 1/FES 1 19 7 7 36 67.5 164.50 …0001 M6 –M20 40 FE 2/FES 2 31 12 12 53 94.5 207.50 …0004 M14–M33 40 FE 3/FES 3 48 17.5 17.5 78 164.5 259.00 …0007 M3 –M12 50 FE 1/FES 1 19 7 7 36 77 259.00 …0010 M6 –M20 50 FE 2/FES 2 31 12 12 53 102.5 263.50 …0013 M14–M33 50 FE 3/FES 3 48 17.5 17.5 78 142.5 423.50 …0016 (W065) Thread tapping quick-exchange chuck, with elastic length compensation ISO 7388-2 A Design: With HSK shank. Application: Can be used for right-hand and left-hand threads for both horizontal and vertical machining on CNC machining centres, special and drilling machines. Cutting of the tap due to differences between the tap pitch and the machine feed is prevented by the length compensation on compression and tension. The use of a longitudinal ball bearing guide in the length compensation makes the feed particularly durable and smooth-running at high torques. for taps HSK For insert type Insert ∅ d1 mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d2 mm Projection length l1 mm 3337 Order No. € M3 –M12 63 FE 1/FES 1 19 7.5 7.5 41 72 390.00 …0001 M6 –M20 63 FE 2/FES 2 31 10 12.5 60 110 435.50 …0004 M14–M33 63 FE 3/FES 3 48 17.5 17.5 86 141 751.00 …0007 M3 –M12 100 FE 1/FES 1 19 7.5 7.5 41 80 525.00 …0010 M6 –M20 100 FE 2/FES 2 31 10 12.5 60 100 593.00 …0013 M14–M33 100 FE 3/FES 3 48 17.5 17.5 86 144 831.00 …0016 (W347) Thread tapping quick-exchange chuck, with elastic length compensation ISO 12164-1 A Design: With HSK shank. Application: For thread tapping, for mounting thread tapping inserts FE/FES. Note: Quick-exchange insert FE for tapping quick-exchange chuck (Order No. 3344 0001) Ç 3/102. for taps HSK For insert type Insert ∅ mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d1 mm Projection length l1 mm 3338 Order No. € M3 –M12 63 FE 1/FES 1 19 7.5 7.5 40 81 365.00 …0001 M6 –M20 63 FE 2/FES 2 31 10 10 53 119 396.50 …0004 M14–M33 63 FE 3/FES 3 48 17.5 17.5 78 176 473.00 …0007 M3 –M12 100 FE 1/FES 1 19 7.5 7.5 40 90 529.50 …0010 M6 –M20 100 FE 2/FES 2 31 10 10 53 138 552.00 …0013 M14–M33 100 FE 3/FES 3 48 17.5 17.5 78 190 642.00 …0016 (W065) Thread tapping quick-exchange chuck, with elastic length compensation ISO 12164-1 A d1 l 1 l d d 1 1 2 l 1 d1 Tapping chucks 3.4
RkJQdWJsaXNoZXIy NTg4MTI=