FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/99 Design: With cylinder shank. Application: Can be used for right-hand and left-hand threads for both horizontal and vertical machining on CNC machining centres, special and drilling machines. Cutting of the tap due to differences between the tap pitch and the machine feed is prevented by the length compensation on compression and tension. The use of a longitudinal ball bearing guide in the length compensation makes the feed particularly durable and smooth-running at high torques. for taps Shank Ø D mm For insert type Insert ∅ d1 mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d2 mm Projection length l1 mm 3327 Order No. € M3 –M12 20 FE 1/FES 1 19 7.5 7.5 38 39 233.00 …0001 M3 –M12 25 FE 1/FES 1 19 7.5 7.5 38 39 232.00 …0004 M6 –M20 25 FE 2/FES 2 31 12.5 12.5 55 64 273.50 …0007 M3 –M12 32 FE 1/FES 1 19 7.5 7.5 38 39 238.00 …0010 M6 –M20 32 FE 2/FES 2 31 12.5 12.5 55 64 298.50 …0013 M14–M33 32 FE 3/FES 3 48 20 20 78 132.5 511.50 …0016 ​ (W347) Thread tapping quick-exchange chuck, with elastic length compensation DIN 1835 B+E Design: With cylinder shank. Note: Quick-exchange insert FE for tapping quick-exchange chuck (Order No. 3344 0001) Ç 3/102. for taps Shaft ∅ mm For insert type Insert ∅ mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d1 mm Projection length l1 mm 3328 Order No. € M3 –M12 20 FE 1/FES 1 19 7 7 38 41 140.00 …0001 M3 –M12 25 FE 1/FES 1 19 7 7 38 41 143.00 …0004 M3 –M12 32 FE 1/FES 1 19 7 7 38 41 147.50 …0007 M6 –M20 25 FE 2/FES 2 31 12 12 55 63 152.50 …0010 M6 –M20 32 FE 2/FES 2 31 12 12 55 63 158.00 …0013 M14–M33 32 FE 3/FES 3 48 17.5 17.5 79 97 218.00 …0016 ​ (W065) Thread tapping quick-exchange chuck, with elastic length compensation DIN 1835 B+E A Design: With steep taper shank. Note: Quick-exchange insert FE for tapping quick-exchange chuck (Order No. 3344 0001) Ç 3/102. for taps SK For insert type Insert ∅ mm Length compensation, pressure mm Length compensation, tension mm Outer ∅ d1 mm Projection length l1 mm 3329 Order No. € M3 –M12 40 FE 1/FES 1 19 7 7 36 50 173.00 …0001 M6 –M20 40 FE 1/FES 2 31 12 12 53 78 218.00 …0004 M14–M33 40 FE 3/FES 3 48 17.5 17.5 78 143 273.00 …0007 M3 –M12 50 FE 1/FES 1 19 7 7 36 54 273.00 …0010 M6 –M20 50 FE 2/FES 2 31 12 12 53 80 277.50 …0013 M14–M33 50 FE 3/FES 3 48 17.5 17.5 78 130 446.00 …0016 ​ (W065) Thread tapping quick-exchange chuck, with elastic length compensation DIN 2080 A l d d D 1 1 2 d1 l 1 d1 l 1 Tapping chucks 3.4

RkJQdWJsaXNoZXIy NTg4MTI=