FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/69 Design: Short taper mount with stud bolt for Camlock. Direct mount. The steel body and spiral ring are drop-forged. The front side is flattened at the edges up to size 315 mm, thereby reducing weight inertia and mass inertia. Application: For use on lathes, rotary tables, indexing devices etc., where high clamping forces and high concentricity and accurate repetition are required. Scope of delivery: Three-jaw lathe chuck with one set each of drilling jaws and turning jaws, chuck key and fixing bolts. Size A mm Short taper Taper size B mm Through-hole ∅ E mm Height without jaws D mm Concentricity mm max. rpm rpm 3111 Order No. € 125 4 63.5 32 56 0.03 5500 736.00 …0019 160 4 63.5 42 65 0.03 4600 824.00 …0021 160 5 82.5 42 65 0.03 4600 824.00 …0023 200 5 82.5 55 73.5 0.04 4000 961.00 …0025 200 6 106.4 55 73.5 0.04 4000 961.00 …0027 250 6 106.4 76 82 0.04 3000 1412.00 B …0029 250 8 139.7 76 82 0.04 3000 1412.00 …0031 315 6 106.4 103 95 0.05 2300 2200.00 B …0033 315 8 139.7 103 95 0.05 2300 2200.00 B …0035 315 11 196.9 103 95 0.05 2300 C◊ B …0037 400 8 139.7 136 105 0.06 1800 C◊ B …0039 400 11 196.9 136 105 0.06 1800 C◊ B …0041 ​ (W301) Spiral ring three-jaw chuck, DURO-M m DIN 55029 with retention stud for Camlock Design: Body made from cast iron or steel with one-piece jaws and scroll, centric clamping. Application: For use on lathes, rotary tables, indexing devices etc., where high clamping forces and high concentricity and accurate repetition are required. Scope of delivery: Four-jaw lathe chuck with chuck key and mounting screws, with one set of outward-stepped jaws (drilling jaws) and one set of inwardstepped jaws (rotary jaws). Size A mm Throughhole ∅ E mm Centring hole B mm Height without jaws D mm Jaw height J mm Centring depth C mm Concentricity mm max. rpm rpm 3018 3122 Order No. Cast ZG Steel € € 80 19 56 39.5 14 3 0.03 7000 – 611.00 …0001 100 20 70 50 18 3 0.03 6300 – 643.50 …0003 100 20 70 50 18 3 0.04 4500 557.50 – …0100 125 32 95 56 22.5 4 0.03 5500 – 796.00 …0005 125 32 95 56 22.5 4 0.04 4000 569.50 – …0125 160 42 125 65 26 4 0.03 4600 – 972.50 …0007 160 42 125 65 26 4 0.04 3600 622.00 – …0160 200 55 160 83.5 32.5 4 0.04 4000 – 1102.00 …0009 200 55 160 73.5 32.5 4 0.06 3000 742.50 – …0200 250 76 200 82 40 5 0.04 3000 – 1402.00 …0011 250 76 200 82 40 5 0.06 2500 966.00 – …0250 315 103 260 95 46 5 0.05 2300 – 2242.00 B …0013 315 103 260 95 46 5 0.08 2000 1802.00 B – …0315 400 136 330 105 43 5 0.06 1800 – C◊ B …0015 500 190 420 120 54.5 5 0.08 1300 – C◊ B …0017 ​ (W300) (W301) Four-jaw scroll chuck, ZG and ZS DIN 6350 A 3018 Cast ZG 3122 m DURO-M, the steel body and spiral ring are drop-forged. The front side is flattened at the edges up to size 315 mm, thereby reducing weight inertia and mass inertia. Delivery with one set of drill jaws and rotary jaws. 3122 3018 A Lathe chucks 3.2

RkJQdWJsaXNoZXIy NTg4MTI=