FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/68 Design: Centre clamping. With cylindrical centring mount for spindle heads. Application: For use on lathes, rotary tables, indexing devices etc., where high clamping forces and high concentricity and accurate repetition are required. Scope of delivery: Three-jaw lathe chuck with chuck key and mounting screws. Size A mm Throughhole ∅ E mm Centring hole B mm Height without jaws D mm Jaw height J mm Centring depth C mm Concentricity mm max. rpm rpm 3000 3059 Order No. Cast Steel € € 3000 3059 3000 3059 80 19 56 39.5 14 3 – 0.03 – 7000 – 493.50 …0080 100 20 70 50 18 3 0.04 0.03 4500 6300 480.00 545.00 …0100 125 32 95 56 22.5 4 0.04 0.03 4000 5500 511.00 644.50 …0125 160 42 125 65 26 4 0.04 0.03 3600 4600 565.50 705.50 …0160 200 55 160 73.5 32.5 4 0.06 0.04 3000 4000 666.50 871.50 …0200 250 76 200 82 40 5 0.06 0.04 2500 3000 896.00 1181.00 …0250 315 103 260 95 46 5 0.08 0.05 2000 2300 1428.00 B 1937.00 B…0315 400 136 330 105 43 5 – 0.06 – 1800 – CB …0400 500 190 420 120 54.5 5 – 0.08 – 1300 – CB …0500 ​ (W300) (W301) Three-jaw scroll chuck DIN 6350 A 3000 Cast, with one set of one-piece reversible jaws. 3059 m DURO-M, the steel body and spiral ring are drop-forged. The front side is flattened at the edges up to size 315 mm, thereby reducing weight inertia and mass inertia. Delivery with one set of drill jaws and rotary jaws. 3059 3000 Design: With direct holding fixture. The steel body and spiral ring are dropforged. The front side is flattened at the edges up to size 315 mm, thereby reducing weight inertia and mass inertia. Application: For use on lathes, rotary tables, indexing devices etc., where high clamping forces and high concentricity and accurate repetition are required. Scope of delivery: Three-jaw lathe chuck with one set each of drilling jaws and turning jaws, chuck key and fixing bolts. Size A mm Short taper Taper size B mm Through-hole ∅ E mm Height without jaws D mm Concentricity mm max. rpm rpm 3111 Order No. € 160 4 63.5 42 65 0.03 4600 783.50 …0001 160 5 82.5 42 65 0.03 4600 783.50 …0003 200 5 82.5 55 73.5 0.04 4000 937.50 …0005 200 6 106.4 55 73.5 0.04 4000 937.50 …0007 250 6 106.4 76 82 0.04 3000 1223.00 …0009 315 6 106.4 103 95 0.05 2300 C◊ B …0011 315 8 139.7 103 95 0.05 2300 C◊ B …0013 400 8 139.7 136 105 0.06 1800 C◊ B …0015 400 11 196.9 136 105 0.06 1800 C◊ B …0017 ​ (W301) Spiral ring three-jaw chuck, DURO-M m DIN 55027 with retention stud and collar nut A Lathe chucks 3.2

RkJQdWJsaXNoZXIy NTg4MTI=