FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/44 Design: Material with tensile strength of 1600 to 1800 N/mm2, hardness of 52 ±2 HRC. Hydraulic fluid is compressed using a hydraulic clamping set (pressure screw, pressure pin, seal) using a hexagonal T-key. The pressure causes an even deformation of the expansion sleeve, which can cause the tool shank to be clamped with a high concentricity (max. 3 µm). Taper to DIN 254. Taper angle tolerance: AT3 Maximum speed:. 40000 min-1 Optimum application temperature: 20–50 °C Coolant pressure maximum: 80 bar Adjustment track: 10 mm Scope of delivery: Hydraulic expansion clamping chuck with hexagonal T-key. d1 mm HSK d2 mm d3 mm l1 mm l2 mm l3 mm l4 mm G A/F mm 3547 Order No. € 6 63 26 50 70 37 10 24 M5 2.5 429.50 …0002 6 63 26 50 150 37 10 110 M5 2.5 697.50 …0005 8 63 28 50 70 37 10 24 M6 3 429.50 …0008 8 63 28 50 150 37 10 110 M6 3 697.50 …0011 10 63 30 50 8041 10 32M8x1 3 429.50 …0014 10 63 30 50 150 41 10 110 M8 x1 3 697.50 …0017 12 63 32 50 85 46 10 40 M10 x 1 5 429.50 …0020 12 63 32 50 150 46 10 110 M10 x 1 5 697.50 …0023 14 63 34 50 85 46 10 40 M10 x 1 5 429.50 …0026 ​ (W326) d1 mm HSK d2 mm d3 mm l1 mm l2 mm l3 mm l4 mm G A/F mm 3547 Order No. € 14 63 34 50 150 46 10 110 M10 x 1 5 697.50 …0029 16 63 38 50 90 49 10 45 M12 x 1 5 429.50 …0032 16 63 38 50 150 49 10 110 M12 x 1 5 697.50 …0035 18 63 40 50 90 49 10 46 M12 x 1 5 429.50 …0038 18 63 40 50 150 49 10 110 M12 x 1 5 697.50 …0041 20 63 42 50 90 51 10 48 M16 x 1 5 429.50 …0044 20 63 42 50 150 51 10 110 M16 x 1 5 697.50 …0047 25 63 57 53 120 57 10 63 M16 x 1 5 429.50 …0050 ​ (W326) Hydraulic expansion chuck short, slim ISO 12164-1 A ≤ 3 µm Design: Axial longitudinal setting, for tool shank tolerance h6. Hydraulic fluid is compressed using a hydraulic clamping set (pressure screw, pressure pin, seal) using a hexagonal T-key. The pressure created causes an even deformation of the expansion sleeve, which causes the tool shank to be clamped with a high concentricity. Scope of delivery: Hydraulic expansion chuck incl. length setting screw and hexagonal chuck key with cross handle. d4 mm HSK d2 mm d1 mm l1 mm l2 mm l4 mm l5 mm A/F mm 3603 Order No. € 6 63 26 50 70 37 24 24.5 5 355.00 …0600 8 63 28 50 70 37 24 24.5 5 355.00 …0800 10 63 30 50 80 41 35 35.5 5 355.00 …1000 12 63 32 50 85 46 40 41.5 5 355.00 …1200 14 63 34 50 85 46 40 41.5 5 355.00 …1400 ​ (W321) d4 mm HSK d2 mm d1 mm l1 mm l2 mm l4 mm l5 mm A/F mm 3603 Order No. € 16 63 38 50 90 49 46 45.5 5 355.00 …1600 18 63 40 50 90 49 47 48.5 5 355.00 …1800 20 63 42 50 90 51 48 47.5 5 355.00 …2000 25 63 57 63 120 59 57 55.3 6 355.00 …2500 ​ (W321) Hydraulic chuck ISO 12164-1 A ≤ 3 µm Design: Very resistant special coating. Quick and easy adapter sleeve and tool change. With peripheral cooling, optional central cooling available on request. Clamping range mm 3663 Order No. € 1 168.50 …0001 2 101.50 …0002 3 88.10 …0003 ​ (W318) Clamping range mm 3663 Order No. € 4 88.10 …0004 5 88.10 …0005 6 88.10 …0006 ​ (W318) Clamping sleeve for chuck extension l1 l4 d3 d2 d1 l2 l3 G l1 l5 l2 10 A SW B d3 d1 d2 d4 0,003 A Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=