FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/45 Design: High Performance Holder. Short, heavy-duty design. For extremely high holding forces and very high transferable torque. Vibration-reducing effect for a better workpiece surface. High temperature resistance up to 170°. Hole for data carrier/chip (Balluf). Scope of delivery: Hydraulic expansion chuck with hexagonal T-key. d1 mm HSK d2 mm l1 mm l2 mm l3 mm G A/F mm 3547 Order No. € 20 63 49 80 51 10 M8 x 1 3 C◊ …0100 ​ (W326) Hydraulic expansion chuck, short, heavy ISO 12164-1 A ≤ 3 µm Design: Axial longitudinal setting, for tool shank tolerance h6. Hydraulic fluid is compressed using a hydraulic clamping set (pressure screw, pressure pin, seal) using a hexagonal T-key. The pressure created causes an even deformation of the expansion sleeve, which causes the tool shank to be clamped with a high concentricity. Scope of delivery: Hydraulic expansion chuck incl. length setting screw and hexagonal chuck key with cross handle. d1 mm HSK d2 mm l1 mm l2 mm A/F mm 3604 Order No. € 20 63 52.5 80 51 5 254.00 …2000 ​ (W321) Hydraulic expansion chuck, short, reinforced version ISO 12164-1 A ≤ 3 µm Design: High Performance Holder. Short, heavy-duty design. For high holding forces and high, transferable torque. Long service life. Vibration-reducing effect for a better workpiece surface. Quick and easy clamping. Temperature resistant up to 170 °C. Slim 3° contour as seen on shrink-fit holding fixtures. Maximum flexibility thanks to the use of reducing sleeves. Application: Ideal for use in tool- and mould-making. Scope of delivery: Hydraulic expansion chuck with hexagonal T-key. d1 mm HSK d2 mm d3 l1 mm l2 mm l3 mm l4 mm G A/F mm 3556 Order No. € 3 63 9 50 120 28 16 73 M3 1.5 C◊ …0050 4 63 10 50 120 28 12 73 M3 1.5 C◊ …0051 5 63 11 50 120 28 8 73 M3 1.5 C◊ …0052 6 63 12 50 120 37 10 73 M5 2.5 C◊ …0053 8 63 14 50 120 37 10 74 M6 3 C◊ …0054 10 63 16 50 120 41 10 74 M8 x 1 3 C◊ …0055 12 63 18 50 120 46 10 75 M10 x 1 5 C◊ …0056 ​ (W326) HPH chuck Multi, 3° ISO 12164-1 A ≤ 3 µm l1 d2 d1 l2 l3 G l 1 d 1 d 2 d 3 3° l 4 l 2 l 3 G 0,003 A l1 l2 10 A SW B d3 d1 d2 Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=