FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/43 Design: Guide elements of rigid design, hardened and ground wear parts ensure high concentricity and long life. 100 % concentricity test with different plug gauge diameters at various measuring points, based on DIN ISO 10888. Compact design and high rigidity result in best machining results. High clamping forces are achieved with low effort by utilising the integrated worm gear. Machining is safe thanks to automatic blocking of the worm gear even when running anti-clockwise and quickly decelerated spindle. Taper surface roughness: Ra < 0.001 mm Application: For drilling, countersinking, reaming, thread cutting and for simple finishing milling work. Can be used in machining centres, turning, drilling and milling machines. Scope of delivery: Short drill chuck with hexagon spanner. Note: Higher speeds possible with special balancing. Also available as ULTRA design (concentricity 0.015 mm). Clamping range mm HSK l1 mm l2 mm d1 mm d2 mm 3489 Order No. € 0.5–10 63 85 38 38 45 424.00 …0001 1 –16 63 98 – 50 – 386.50 …0007 ​ (W318) Clamping range mm HSK l1 mm l2 mm d1 mm d2 mm 3489 Order No. € 1–16 100 104 – 50 – C◊ …0009 ​ (W318) CNC precision short drill chuck AKL for clockwise and anti-clockwise rotation ISO 12164-1 A ≤ 30 µm Design: Made of special case-hardened steel for highly stressed components, with a core tensile strength of min. 1000 N/mm2. Modular design. Clamping (using a hex spanner) essentially increases clamping force in comparison to conventional chucks. At the same time, this secures the chuck against becoming loose during anti-clockwise rotation or being quickly decelerated from higher speeds. Taper angle tolerance: AT3 Hardened: 58 ± 2 HRC Application: Use on CNC machines and machining centres. To mount tools with cylindrical shank. Scope of delivery: CNC precision drill chuck with hex spanner including sealing disc for coolant drill bits with 3-6 mm Ø. Clamping range mm HSK d2 mm l2 mm l1 mm 3523 3524 Order No. ​ IC € € 0.3– 8 63 36 96 99 425.50 461.50 …0002 0.5–13 63 50 109 115 340.50 375.50 …0001 2.5–16 63 57 109 115 352.00 386.00 …0007 ​ (W325) (W325) Clamping range mm HSK d2 mm l2 mm l1 mm 3523 3524 Order No. ​ IC € € 0.5–13 100 50 111 117 C◊ C◊ …0004 2.5–16 100 57 111 122 C◊ C◊ …0010 ​ (W325) (W325) CNC precision chuck for clockwise and anti-clockwise rotation ISO 12164-1 A ≤ 20 µm 3523 Without coolant supply. 3524 With central coolant supply. Design: High-precision chuck extension together with a precision chuck. Very good concentricity. Better vibration damping compared to shrink-fit chucks (due to clamping sleeve compound). Slim contour D1 = 13 mm. Holding torque independent of shank tolerances (as tightening torque is always built up constantly when clamping surfaces are in contact with the shank). Maintenancefree, robust and durable. Sealed against coolant and dirt. Easy clamping by means of a hexagonal wrench (no equipment necessary). Application: Perfect for micro-machining, enables machining in hard-to-reach machining zones. Certainty through trusting in the process for clamping small shank diameters, also under 3 mm. For clamping cylinder shanks in accordance with DIN 1835 A, B and DIN 6535-HB, HA and HE to D = 6 mm. Cylindrical shank ∅ h6 x L mm Shank Clamping range mm 3500 Order No. € 14 x 100 SW 13 1–6 263.50 …1410 14 x 150 SW 13 1–6 277.00 …1415 20 x 100 SW 13 1–6 277.00 …2010 20 x 150 SW 19 1–6 290.50 …2015 ​ (W318) Chuck extension d2 d1 l1 l2 Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=