FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/38 Design: Made of special case-hardened steel for highly stressed components, with a core tensile strength of min. 1000 N/mm2. High repeat accuracy when changing tools. Fixed axial positioning through flange contact surface. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened: 58 ± 2 HRC Application: For mounting and holding tools with cylinder shank in collets acc. to DIN 6499 (ER) Scope of delivery: Collet chuck complete with clamping nut. Clamping range mm HSK Collet d1 mm l1 mm 3127 Order No. € 0.5– 7 63 ER11 16 100 151.50 …0001 0.5– 7 63 ER11 16 160 174.50 …0010 0.5–10 63 ER16 22 100 151.50 …0004 ​ (W053) Clamping range mm HSK Collet d1 mm l1 mm 3127 Order No. € 0.5–10 63 ER16 22 160 174.50 …0013 1 –16 63 ER25 35 100 151.50 …0007 1 –16 63 ER25 35 160 174.50 …0016 ​ (W053) Miniature collet chuck for ER collets ISO 12164-1 A ≤ 5 µm Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Low tendency to vibration due to rigid shank All functional surfaces precision machined and guaranteed quality due to double 100% control. Taper angle tolerance: AT3 Hardened: 58 –2 HRC Application: For clamping tools with cylindrical shank in Power Collet collets and in collets to ISO 15488. For high-speed machining and heavy machining. Increased cutting performance due to higher speeds, feed rates and greater depth of cut. The increased running smoothness due to the low-vibration geometry ensures better surface quality and protects the tool, spindle and machine. Scope of delivery: Scope of delivery: Collet chuck complete with Power Collet clamping nut. Note: Optimal cutting performance in conjunction with Power Collet collets. Clamping range mm HSK Collet ∅ D mm L mm A mm 3128 Order No. € 2–10 63 ER16 28 28.5 75 C◊ …0001 2–10 63 ER16 28 43 100 C◊ …0004 2–16 63 ER25 42 36 75 C◊ …0007 ​ (W394) Clamping range mm HSK Collet ∅ D mm L mm A mm 3128 Order No. € 2–16 63 ER25 42 51 100 C◊ …0010 2–20 63 ER32 50 42 75 C◊ …0013 2–20 63 ER32 50 53 100 C◊ …0016 ​ (W394) Collet chucks, Power Collet Chuck Dimension A differs when using standard collets according to ISO 15488. ISO 12164-1 A ≤ 3 µm Design: Constant concentricity and repeatability of 0.003 mm at a distance of 3 x D (maximum 50 mm) in conjunction with FAHRION precision collet GERCHP/-- HPD/-- HPDD (2 µm). Tighten using roller wrench without risk of injury. Up to 100 % higher holding torques than with conventional collet chucks. Insensitive to temperature fluctuations. Very good vibration damping and stability. Application: In the HSC and HPC range as well as for high-precision machining results. To mount tools with cylindrical shank as well as according to DIN 1835B, 1835-E, 6535-B and 6535-E Note: Delivered without clamping nut and roller wrench. Clamping range mm HSK Collet Clamping nut A mm D mm E mm G mm H mm 3569 Order No. € 1–10 63 GERC16-HP/HPD/HPDD/GBD HPC16 55 30 32 – – 137.50 …1016 1–10 63 GERC16-HP/HPD/HPDD/GBD HPC16 100 30 71 28–45 16–31 137.50 …0116 1–10 63 GERC16-HP/HPD/HPDD/GBD HPC16 130 30 87 26–50 17–38 C◊ …0216 1–10 63 GERC16-HP/HPD/HPDD/GBD HPC16 160 30 106 28–45 16–31 200.50 …0316 1–10 63 GERC25-HP/HPD/HPDD/GBD HPC25 60 32 37 – – 137.50 …0025 1–16 63 GERC25-HP/HPD/HPDD/GBD HPC25 100 40 70 35–55 24–37 137.50 …0125 1–16 63 GERC25-HP/HPD/HPDD/GBD HPC25 130 40 89 37–60 12–42 C◊ …0225 1–16 63 GERC25-HP/HPD/HPDD/GBD HPC25 160 40 128 35–60 24–42 205.00 …0325 ​ (W315) Collet chuck, CENTRO P, 3 µm Further dimensions available on request. ISO 12164-1 A Continued on next page L A ER Ø D 8° A E G H D Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=