Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/39 Clamping range mm HSK Collet Clamping nut A mm D mm E mm G mm H mm 3569 Order No. € 2–20 63 GERC32-HP/HPD/HPDD/GBD HPC32 70 50 46 – – 137.50 …0032 2–20 63 GERC32-HP/HPD/HPDD/GBD HPC32 100 50 71 41–57 26–39 137.50 …0132 2–20 63 GERC32-HP/HPD/HPDD/GBD HPC32 130 50 101 42–69 18–41 C◊ …0232 2–20 63 GERC32-HP/HPD/HPDD/GBD HPC32 160 50 129 52–70 26–60 205.00 …0332 (W315) Continued Further dimensions available on request. Collet chuck, CENTRO P, 3 µm Design: Slim design with hollow shank taper for HPCM mini nuts. Constant concentricity and repeatability of 0.003 mm at a distance of 3 x D (maximum 50 mm) in conjunction with FAHRION precision collet GERC-HP/-- HPD/-- HPDD (2 µm). Tighten using roller wrench without risk of injury. Insensitive to temperature fluctuations. Very good vibration damping and stability. Application: In the HSC and HPC range as well as for high-precision machining results. To mount tools with cylindrical shank as well as according to DIN 1835B, 1835-E, 6535-B and 6535-E Note: Delivered without clamping nut and roller wrench. Clamping range mm HSK Collet Clamping nut A mm D mm E mm G mm H mm 3587 Order No. € 1– 7 63 GERC11-HP/HPD HPC11M 70 16 48 15–32 7–22 149.00 …0011 1– 7 63 GERC11-HP/HPD HPC11M 100 16 78 18–36 12–26 149.00 …0111 1– 7 63 GERC11-HP/HPD HPC11M 130 16 108 15–32 7–22 C◊ …0211 1– 7 63 GERC11-HP/HPD HPC11M 160 16 138 18–36 12–26 216.50 …0311 1–10 63 GERC16-HP/HPD/HPDD/GBD HPC16MS 70 22 46 27–34 14–20 149.00 …0016 1–10 63 GERC16-HP/HPD/HPDD/GBD HPC16MS 100 22 71 27–44 14–30 149.00 …0116 1–10 63 GERC16-HP/HPD/HPDD/GBD HPC16MS 130 22 87 27–52 14–38 C◊ …0216 1–10 63 GERC16-HP/HPD/HPDD/GBD HPC16MS 160 22 97 27–52 14–38 216.50 …0316 (W315) Collet chuck, CENTRO P, 3 µm Further dimensions available on request. ISO 12164-1 A Application: For high-precision and economical clamping of tools with cylindrical shank in HG chucks within a high clamping range. ∅ D mm HG ∅ D1 mm L mm 3295 Order No. € 2 01 14.7 52.5 149.50 …0102 3 01 14.7 52.5 149.50 …0103 4 01 14.7 52.5 149.50 …0104 5 01 14.7 52.5 94.30 …0105 6 01 14.7 52.5 94.30 …0106 8 01 14.7 52.5 94.30 …0108 (W394) ∅ D mm HG ∅ D1 mm L mm 3295 Order No. € 10 02 17.87 64.2 94.30 …0110 12 02 17.87 64.2 94.30 …0112 14 02 17.87 64.2 94.30 …0114 16 03 26.147 69.7 94.30 …0116 18 03 26.147 69.7 94.30 …0118 20 03 26.147 69.7 94.30 …0120 (W394) High precision collet Design: Precision balanced. Made of special case-hardened steel for highly stressed components, with a core tensile strength of min. 1000 N/mm2. All functional surfaces precision machined and guaranteed quality due to double 100% control. More precise than DIN. Hardened: 58 ± 2 HRC Application: For clamping shell end mills DIN 841 and DIN 1880 as well as single angle milling cutters DIN 842 and face mills DIN 1830. Scope of delivery: Combi shell end mill arbour complete with cutter retaining screw, driving ring and feather key. ∅ d1 mm ∅ d2 mm l1 mm l2 mm l3 mm 3261 Order No. HSK 63 € 16 32 60 27 17 167.50 …0001 16 32 100 27 17 C◊ …0004 (W394) Combination-face mill adaptor ISO 12164-1 A ≤ 6 µm Continued on next page A E G H D L A Ø D1 Ø D2 L2 L1 Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=