Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/37 Design: With inner coolant supply. Made of special case-hardened steel for highly stressed components, with a core tensile strength of min. 950 N/mm2. Hardened: 58 ± 2 HRC Application: For clamping milling cutters with cylindrical shank and lateral driving plane in accordance with DIN 1835-B and DIN 6535-HB. Scope of delivery: Face chuck with clamping screw, without coolant pipe. ∅ d1 mm HSK ∅ d2 mm l1 mm 3125 Order No. € 6 63 25 65 118.00 …0001 8 63 28 65 118.00 …0004 10 63 35 65 114.00 …0007 12 63 42 80 114.00 …0010 14 63 44 80 114.00 …0013 (W050) ∅ d1 mm HSK ∅ d2 mm l1 mm 3125 Order No. € 16 63 48 80 114.00 …0016 18 63 50 80 114.00 …0019 20 63 52 80 114.00 …0022 25 63 65 110 122.00 …0025 32 63 72 110 131.50 …0028 (W050) Weldon system, surface clamping chuck, with cooling channel slots ISO 12164-1 A ≤ 5 µm Design: Precision balanced. Made of special case-hardened steel for highly stressed components, with a core tensile strength of min. 1000 N/mm2. All functional surfaces precision machined and guaranteed quality due to double 100% control. More precise than DIN. Hardened: 58 –2 HRC Application: For clamping milling cutters with cylindrical shank in collets to ISO 15488 (previously DIN 6499). Scope of delivery: Collet chuck complete with clamping nut (balanced, with anti-friction coating for increased clamping force), without coolant pipe. Note: Dimension l2 specifies the maximum insertion depth for tools. Clamping range mm Collet ∅ d1 mm l2 mm l1 mm 3256 Order No. HSK 63 € 0.5–7 ER11 19 26.5 75 180.00 * …0001 0.5–7 ER11 19 – 100 167.50 …0004 0.5–10 ER16 28 46.5 75 180.00 * …0013 0.5–10 ER16 28 32.5 100 147.50 …0016 0.5–10 ER16 28 32.5 160 179.00 …0019 1 –16 ER25 42 48 75 180.00 * …0025 1 –16 ER25 42 41 100 160.00 …0028 1 –16 ER25 42 41 160 198.00 …0031 1.5–20 ER32 50 47 75 191.00 * …0037 1.5–20 ER32 50 47 100 168.50 …0040 1.5–20 ER32 50 47 160 217.50 …0043 2.5–26 ER40 63 53 85 C◊ * …0049 2.5–26 ER40 63 53 120 C◊ …0052 2.5–26 ER40 63 53 160 C◊ …0055 (W394) Clamping range mm Collet ∅ d1 mm l2 mm l1 mm 3258 Order No. HSK 100 € 0.5–10 ER16 28 32.5 100 C◊ …0016 0.5–10 ER16 28 32.5 160 C◊ …0019 1 –16 ER25 42 41 100 C◊ …0028 1 –16 ER25 42 41 160 C◊ …0031 1.5–20 ER32 50 47 100 C◊ …0040 1.5–20 ER32 50 47 160 C◊ …0043 2.5–26 ER40 63 53 120 C◊ …0052 2.5–26 ER40 63 53 160 C◊ …0055 (W394) Collet chuck, type ER * Without thread for setting screw. ISO 12164-1 A ≤ 3 µm Design: Precision balanced. Made of special case-hardened steel for highly stressed components, with a core tensile strength of min. 950 N/mm2. Hardened: 58 ± 2 HRC Application: For clamping milling cutters with cylindrical shank in collets according to DIN 6499 Scope of delivery: Collet chuck complete with clamping nut. Note: Dimension l2 specifies the maximum insertion depth for tools. Clamping range mm HSK Collet ∅ d1 mm l2 mm l1 mm 3126 Order No. € 0.5–10 63 ER16 28 47 75 98.20 …0001 0.5–10 63 ER16 28 33 100 101.00 …0004 1 –16 63 ER25 42 48 75 98.20 …0007 1 –16 63 ER25 42 41 100 104.50 …0010 (W050) Clamping range mm HSK Collet ∅ d1 mm l2 mm l1 mm 3126 Order No. € 1.5–20 63 ER32 50 47 75 102.00 …0013 1.5–20 63 ER32 50 47 100 108.50 …0016 2.5–26 63 ER40 63 53 90 110.00 …0019 2.5–26 63 ER40 63 53 100 117.00 …0022 (W050) Collet chuck, type ER ISO 12164-1 A ≤ 5 µm d2 d1 l1 d1 l1 l2 d1 l1 l2 Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=