Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/31 Application: For high-precision clamping of tools with cylindrical shank in HG chucks within a high clamping range. ∅ D mm HG ∅ D1 mm L mm 3295 Order No. € 2 01 14.7 52.5 149.50 …0102 3 01 14.7 52.5 149.50 …0103 4 01 14.7 52.5 149.50 …0104 5 01 14.7 52.5 94.30 …0105 6 01 14.7 52.5 94.30 …0106 8 01 14.7 52.5 94.30 …0108 (W394) ∅ D mm HG ∅ D1 mm L mm 3295 Order No. € 10 02 17.87 64.2 94.30 …0110 12 02 17.87 64.2 94.30 …0112 14 02 17.87 64.2 94.30 …0114 16 03 26.147 69.7 94.30 …0116 18 03 26.147 69.7 94.30 …0118 20 03 26.147 69.7 94.30 …0120 (W394) High precision collet Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Concentricity: BT 40 = 0.01 mm, BT 50 = 0.015 mm Hardened: 58 ± 2 HRC Application: For clamping shell end mills DIN 841 and DIN 1880 as well as single angle milling cutters DIN 842 and face mills DIN 1830. Scope of delivery: Combi face mill adaptor with cutting retaining screw, driving ring and keyed slot nut. ∅ d1 mm l1 mm l2 mm l3 mm d2 mm 3109 Order No. BT 40 € 16 55 17 45 32 56.30 …4016 16 100 17 45 32 72.70 …4116 22 55 19 43 40 56.30 …4022 22 100 19 43 40 74.20 …4122 27 55 21 45 48 56.30 …4027 27 100 21 45 48 75.60 …4127 32 60 24 46 58 61.10 …4032 32 100 24 46 58 78.60 …4132 40 60 27 46 70 74.40 …4040 40 100 27 46 70 88.70 …4140 (W050) ∅ d1 mm l1 mm l2 mm l3 mm d2 mm 3109 Order No. BT 50 € 16 70 45 17 32 76.40 …5016 16 100 45 17 32 94.60 …5116 22 70 43 19 40 76.40 …5022 22 100 43 19 40 94.60 …5122 27 70 45 21 48 78.40 …5027 27 100 45 21 48 96.10 …5127 32 70 46 24 58 80.70 …5032 32 100 46 24 58 97.40 …5132 40 70 46 27 70 87.70 …5040 40 100 46 27 70 106.00 …5140 (W050) Combination-face mill adaptor ISO 7388-2 AD ≤ 10 µm ≤ 15 µm Design: Precision balanced. From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. All functional surfaces precision machined and guaranteed quality due to double 100% control. Taper tolerance: AT3 Hardened: 60 –2 HRC Application: For clamping shell end mills DIN 841 and DIN 1880 as well as single angle milling cutters DIN 842 and face mills DIN 1830. Scope of delivery: Combi-face mill adaptor with cutting retaining screw, driving ring and keyed slot nut. ∅ d1 mm ∅ d2 mm l1 mm l2 mm l3 mm 3238 Order No. BT 40 € 16 32 55 17 27 125.00 …4016 22 40 55 19 31 129.50 …4022 27 48 55 21 33 135.50 …4027 32 58 60 24 38 149.50 …4032 (W394) Combination-face mill adaptor ISO 7388-2 AD/B ≤ 3 µm L d2 d1 l1 l2 l3 A L2 L1 Ø D1 Ø D2 Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=