FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/30 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened: 58 ± 2 HRC Application: For mounting and holding tools with cylinder shank in collets acc. to DIN 6499 (ER), slim design. Scope of delivery: Collet chuck complete with clamping nut. d1 mm Collet l1 mm 3106 Order No. BT 40 € 16 ER11 70 106.00 …0001 16 ER11 100 123.00 …0004 16 ER11 160 140.00 …0007 22 ER16 70 106.00 …0010 22 ER16 100 123.00 …0013 22 ER16 160 140.00 …0016 35 ER25 70 106.00 …0019 35 ER25 100 123.00 …0022 35 ER25 160 140.00 …0025 ​ (W053) d1 mm Collet l1 mm 3106 Order No. BT 50 € 22 ER16 70 159.50 …0028 22 ER16 100 169.00 …0031 22 ER16 160 186.00 …0034 35 ER25 70 159.50 …0037 35 ER25 100 169.00 …0040 35 ER25 160 186.00 …0043 ​ (W053) Collet chuck, type ER, Mini ISO 7388-2 AD ≤ 10 µm 3106 0001 – 0025 BT 40 balancing quality: G 2.5 25000 min-1 3106 0028 – 0043 BT 50 balancing quality: G 6.3 15000 min-1 Design: Constant concentricity and repeatability of 0.003 mm at a distance of 3 x D (maximum 50 mm) in conjunction with FAHRION precision collet GERC-HP/-- HPD/-- HPDD (2 µm). Tighten using roller wrench without risk of injury. Up to 100 % higher holding torques than with conventional collet chucks. Insensitive to temperature fluctuations. Very good vibration damping and stability. Application: In the HSC and HPC range as well as for high-precision machining results. To mount tools with cylindrical shank as well as according to DIN 1835-B, 1835-E, 6535-B and 6535-E Note: Delivered without clamping nut and roller wrench. Clamping range mm BT Collet/clamping nut Clamping nut A mm D mm E mm G mm H mm 3567 Order No. € 1–10 40 GERC16-HP/HPD/HPDD/GBD HPC16 75 30 110 39–52 29–38 107.00 …2133 1–16 40 GERC25-HP/HPD/HPDD/GBD HPC25 75 40 90 41–58 36–40 107.00 …2134 2–20 40 GERC32-HP/HPD/HPDD/GBD HPC32 75 50 100 41–72 41–55 107.00 …2135 ​ (W315) Collet chuck, CENTRO P, 3 µm Further dimensions available on request. ISO 7388-2 AD l1 Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=