FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/29 Design: Precision balanced. From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. All functional surfaces precision machined and guaranteed quality due to double 100% control. Taper tolerance: AT3 Hardened: 60 –2 HRC Application: For clamping tools with cylindrical shank in collets to ISO (previously DIN 6499). Scope of delivery: Collet chuck complete with clamping nut (balanced, with anti-friction coating for increased clamping force). Note: Dimension l2 specifies the maximum insertion depth for tools. Collet chuck, type ER Clamping range mm Collet d1 mm l1 mm l2 mm 3234 Order No. BT 40 € 0.5–10 ER16 28 70 * 97.50 …4160 0.5–10 ER16 28 100 * 106.00 …4161 0.5–10 ER16 28 160 * 135.50 …4162 1 –16 ER25 42 70 57 97.50 …4250 1 –16 ER25 42 100 57 116.50 …4251 1 –16 ER25 42 160 57 175.00 …4252 1.5–20 ER32 50 70 64 100.50 …4320 1.5–20 ER32 50 100 64 120.00 …4321 1.5–20 ER32 50 160 64 177.00 …4323 2.5–26 ER40 63 70 73 116.50 …4400 2.5–26 ER40 63 100 73 135.50 …4401 2.5–26 ER40 63 160 73 191.00 …4402 ​ (W394) Clamping range mm Collet d1 mm l1 mm l2 mm 3234 Order No. BT 50 € 0.5–10 ER16 28 70 * 163.00 …5160 0.5–10 ER16 28 100 * 184.50 …5161 0.5–10 ER16 28 160 * 226.00 …5162 1 –16 ER25 42 70 57 177.00 …5250 1 –16 ER25 42 100 57 184.50 …5251 1 –16 ER25 42 160 57 244.00 …5252 1.5–20 ER32 50 70 64 177.00 …5320 1.5–20 ER32 50 100 64 184.50 …5321 1.5–20 ER32 50 160 64 259.50 …5322 2.5–26 ER40 63 80 73 191.00 …5400 2.5–26 ER40 63 100 73 200.50 …5401 2.5–26 ER40 63 160 73 276.50 …5402 ​ (W394) * Drilled through. ISO 7388-2 AD/B ≤ 3 µm Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened: 58 ± 2 HRC Application: For mounting and holding tools with cylinder shank in collets acc. to DIN 6499 (ER) Scope of delivery: Collet chuck complete with clamping nut. Clamping range mm Collet d1 mm l1 mm 3103 Order No. BT 40 € 1–10 ER16 32 63 53.10 …0001 1–10 ER16 32 100 62.30 …0004 1–10 ER16 32 160 106.00 …0007 1–16 ER25 42 60 53.10 …0010 1–16 ER25 42 100 62.30 …0013 1–16 ER25 42 160 106.00 …0016 2–20 ER32 50 70 55.30 …0019 2–20 ER32 50 100 66.90 …0022 2–20 ER32 50 160 108.50 …0025 3–26 ER40 63 80 60.00 …0028 3–26 ER40 63 100 76.10 …0031 3–26 ER40 63 160 113.00 …0034 ​ (W050) Clamping range mm Collet d1 mm l1 mm 3103 Order No. BT 50 € 1–10 ER16 32 70 92.60 …0037 1–10 ER16 32 100 104.50 …0040 1–16 ER25 42 70 92.60 …0043 1–16 ER25 42 100 104.50 …0046 2–20 ER32 50 70 92.60 …0049 2–20 ER32 50 100 124.50 …0052 3–26 ER40 63 70 92.60 …0055 3–26 ER40 63 100 124.50 …0058 ​ (W050) Collet chuck, type ER ISO 7388-2 AD ≤ 10 µm d1 l l 2 1 8° l1 Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=