All prices quoted are non-binding recommended prices. 3/32 Design: Precision balanced. From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. All functional surfaces precision machined and guaranteed quality due to double 100% control. With coolant outlet holes on the end face for milling cutters and internal cooling. Taper tolerance: AT3 Hardened: 60 –2 HRC Application: To mount face mills and milling cutters with cross groove DIN 1880. Scope of delivery: Face mill arbor complete with cutter retaining screw. ∅ d1 mm l1 mm l2 mm d2 mm 3236 Order No. BT 40 € 22 35 19 48 110.00 …4022 27 35 21 48 110.00 …4027 32 65 24 78 147.50 …4032 40 70 27 87 163.00 …4040 (W394) ∅ d1 mm l1 mm l2 mm d2 mm 3236 Order No. BT 50 € 22 55 19 48 182.50 …5022 27 55 21 60 183.50 …5027 32 55 24 78 192.00 …5032 40 55 27 89 198.00 …5040 (W394) Face mill arbor with cooling channel holes ISO 7388-2 AD/B ≤ 6 µm Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Enlarged contact surfaces and cooling channel holes on the end face. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Drill tolerance: H6 Hardened: 58 ± 2 HRC Application: For mounting and holding tools with cross groove acc. to DIN 1880. d1 mm l1 mm l2 mm d2 mm 3113 Order No. BT 40 € 16 40 17 38 54.70 …4016 16 100 17 38 76.40 …4116 22 40 19 48 54.70 …4022 22 100 19 48 76.40 …4122 27 40 21 58 56.70 …4027 27 100 21 58 77.80 …4127 32 40 24 78 60.60 …4032 32 100 24 78 83.40 …4132 40 40 27 88 72.30 * …4040 40 100 27 88 100.50 * …4140 (W050) d1 mm l1 mm l2 mm d2 mm 3113 Order No. BT 50 € 16 35 17 48 76.80 …5016 16 100 17 48 106.50 …5116 22 35 19 48 77.00 …5022 22 100 19 48 106.50 …5122 27 40 21 58 77.00 …5027 27 100 21 58 106.50 …5127 32 50 24 78 81.40 …5032 32 100 24 78 111.00 …5132 40 50 27 88 92.40 * …5040 (W050) Face mill arbor with cooling channel holes * Additionally 4 threaded holes for mounting face mills using tool fixture to DIN 2079 ISO 7388-2 AD ≤ 10 µm Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Drill tolerance: H5 Hardened: 58 ± 2 HRC Application: For mounting and holding tools with Morse taper shank and tangs. MT inner d1 mm l1 mm 3115 Order No. BT 40 € 1 25 50 42.50 …0001 2 32 50 42.50 …0002 3 40 70 42.50 …0003 4 48 95 48.90 …0004 (W050) MT inner d1 mm l1 mm 3116 Order No. BT 50 € 2 32 60 66.40 …0002 3 40 65 66.40 …0003 4 48 95 66.40 …0004 (W050) Spacer ISO 7388-2 AD d2 d1 l1 l2 d1 l1 Tool holders 3.1
RkJQdWJsaXNoZXIy NTg4MTI=