FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 3/13 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened: 58 ± 2 HRC Application: To mount face mills and milling cutters with cross groove to DIN 1880 as well as mounting to DIN 2079 from clamping diameter 40 possible (4 additional threaded holes). Scope of delivery: Combi shell end mill arbour with cutter retaining screw. Note: Cutter retaining screw lock bolt with internal cooling (Order No. 3231 0016) Ç 3/65. d1 mm l1 mm l2 mm d2 mm 3055 Order No. SK 40 € 16 35 17 38 54.80 …0001 16 100 17 38 76.40 …0004 22 35 19 48 54.80 …0007 22 100 19 48 76.40 …0010 27 40 21 58 56.70 …0013 27 100 21 58 77.80 …0016 32 50 24 78 60.60 …0019 32 100 24 78 83.40 …0022 40 50 27 88 72.30 …0025 40 100 27 88 100.50 …0028 ​ (W050) d1 mm l1 mm l2 mm d2 mm 3055 Order No. SK 50 € 16 35 17 48 77.00 …0031 16 100 17 48 106.50 …0034 22 35 19 48 77.00 …0037 22 100 19 48 106.50 …0040 27 40 21 58 77.00 …0043 27 100 21 58 106.50 …0046 32 50 24 78 81.40 …0049 32 100 24 78 111.00 …0052 40 50 27 88 92.40 …0055 40 100 27 88 127.00 …0058 ​ (W050) Face mill mounting with face-side cooling channel drill holes ISO 7388-1 AD/B ≤ 10 µm d1 mm d2 mm l2 mm l1 mm 3220 Order No. SK 40 € 22 48 19 35 115.50 …0004 22 48 19 100 135.50 …0007 27 48 21 35 115.50 …0010 27 60 21 100 145.00 …0013 32 78 24 50 131.50 …0016 32 78 24 100 182.50 …0019 40 87 27 50 157.00 …0022 ​ (W394) d1 mm d2 mm l2 mm l1 mm 3220 Order No. SK 50 € 22 48 19 35 167.50 * …0028 22 48 19 100 195.00 * …0029 27 60 21 35 173.00 * …0031 27 60 21 100 206.50 * …0032 32 78 24 35 177.00 …0034 32 78 24 100 234.50 …0035 40 87 27 50 198.00 …0037 40 87 27 100 234.50 …0038 ​ (W394) Continued * Also suitable for ANSI CAT. Face mill mounting Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. All functional surfaces precision machined and guaranteed quality due to double 100% control. Taper tolerance: AT3 Hardened: 60 –2 HRC Application: For mounting steep taper tools according to ISO 7388-1 (DIN 69871) Form AD , SK 40 and ISO 7388-2 (JIS B 6339 MAS/BT) BT 40. SK outer SK inner l1 mm d1 mm 3211 Order No. € 50 40 43 78 322.00 …0200 ​ (W394) Reducing sleeve ISO 7388-1 AD Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=