FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/12 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Drill tolerance: H6 Hardened: 58 ± 2 HRC Application: For clamping shell end mills DIN 841 and DIN 1880 as well as single angle milling cutters DIN 842 and face mills DIN 1830. Scope of delivery: Face mill adaptor with cutting retaining screw, driving ring and keyed slot nut. Note: Cutter retaining screw lock bolt with internal cooling (Order No. 3231 0016) Ç 3/65. d1 mm l1 mm l2 mm l3 mm d2 mm 3047 Order No. SK 40 € 16 55 17 27 32 54.60 …0016 16 100 17 27 32 70.00 …0116 22 55 19 31 40 55.80 …0022 22 100 19 31 40 71.20 …0122 27 55 21 33 48 55.80 …0027 27 100 21 33 48 72.40 …0127 32 60 24 38 58 62.90 …0032 32 100 24 38 58 75.90 …0132 40 60 27 41 70 72.40 …0040 40 100 27 41 70 85.40 …0140 ​ (W050) d1 mm l1 mm l2 mm l3 mm d2 mm 3051 Order No. SK 50 € 16 55 17 27 32 74.40 …0016 16 100 17 27 32 91.90 …0116 22 55 19 31 40 74.40 …0022 22 100 19 31 40 91.90 …0122 27 55 21 33 48 76.20 …0027 27 100 21 33 48 93.30 …0127 32 55 24 38 58 78.40 …0032 32 100 24 38 58 94.70 …0132 40 55 27 41 70 85.20 …0040 40 100 27 41 70 103.00 …0140 ​ (W050) Combination-face mill adaptor ISO 7388-1 AD ≤ 10 µm Design: Made of hot working steel. Taper angle tolerance: AT3 Hardened: 54 –2 HRC Application: To mount face mills and milling cutters with cross groove DIN 1880. Scope of delivery: Face mill arbor complete with cutter retaining screw. Note: Cutter retaining screw lock bolt with internal cooling (Order No. 3231 0016) Ç 3/65. ∅ D1 mm ∅ D2 mm L mm A mm 3053 Order No. SK 40 € 16 36 17 35 77.00 …0001 22 48 19 35 77.00 …0004 27 48 21 35 77.00 …0007 ​ (W373) ∅ D1 mm ∅ D2 mm L mm A mm 3053 Order No. SK 50 € 22 48 19 35 119.50 …0010 27 60 21 35 122.50 …0013 32 78 24 35 125.50 …0016 ​ (W373) Face mill mounting ISO 7388-1 AD ≤ 6 µm Design: Precision balanced, from alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. All functional surfaces precision machined and guaranteed quality due to double 100% control. With coolant outlet holes on the end face for milling cutters and internal cooling. Taper tolerance: AT3 Hardened: 60 –2 HRC Application: To mount face mills and milling cutters with cross groove to DIN 1880 as well as mounting to DIN 2079 from clamping diameter 40 possible (4 additional threaded holes). Scope of delivery: Face mill arbor complete with cutter retaining screw. Note: Cutter retaining screw lock bolt with internal cooling (Order No. 3231 0016) Ç 3/65. d1 mm d2 mm l2 mm l1 mm 3220 Order No. SK 40 € 16 32 17 35 115.50 …0001 ​ (W394) d1 mm d2 mm l2 mm l1 mm 3220 Order No. SK 40 € 16 36 17 100 133.50 …0002 ​ (W394) Face mill mounting * Also suitable for ANSI CAT. ISO 7388-1 AD/B ≤ 6 µm Continued on next page D1 D2 L A Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=