FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 3/14 Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper tolerance: AT3 Hardened: 58 ± 2 HRC Application: For mounting taper tools according to ISO 7388-1 (DIN 69871) and ISO 7388-2 (JIS B 6339 MAS/BT) BT 40. Scope of delivery: Spacer sleeve, complete with mounted retaining screw. SK outer SK inner d1 mm A mm 3057 Order No. € 40 30 50 50 150.00 …0001 40 40 63 100 150.00 …0004 50 40 70 70 189.50 …0007 ​ (W050) Spacer sleeve for SK ISO 7388-1 A ≤ 10 µm Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened: 58 ± 2 HRC Application: To nest tools with Morse taper shank and tangs. Inner MT d1 mm l1 mm 3063 Order No. SK 40 € 1 25 50 40.40 …0001 2 32 50 40.40 …0004 3 40 70 40.40 …0007 4 48 95 45.50 …0010 ​ (W050) Inner MT d1 mm l1 mm 3064 Order No. SK 50 € 2 32 60 63.80 …0004 3 40 65 63.80 …0007 4 48 95 63.80 …0010 ​ (W050) Spacer sleeve for MT shank with tang ISO 7388-1 AD Design: Balanced. From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper tolerance: AT3 Hardened: 58 –2 HRC Application: For clamping tools with Morse taper shanks with locking thread in accordance with DIN 228-1, Form A. Scope of delivery: Spacer sleeve, complete with mounted retaining screw. MT d1 mm l1 mm 3066 Order No. SK 40 € 1 25 50 72.40 …0001 2 32 50 72.40 …0004 3 40 70 72.40 …0007 4 48 95 75.60 …0010 ​ (W050) MT d1 mm l1 mm 3067 Order No. SK 50 € 2 32 60 97.80 …0004 3 40 65 97.80 …0007 4 48 70 102.00 …0010 5 63 100 117.00 …0013 ​ (W050) Spacer sleeve for MT shank with locking thread ISO 7388-1 AD ≤ 8 µm Design: From alloy case-hardened steel, with a core tensile strength of min. approx. 950 N/mm2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Taper angle tolerance: AT3 Taper surface roughness: Ra < 0.001 mm Hardened 58 ± 2 HRC M l1 mm d1 mm d2 mm d3 mm 3069 Order No. SK 40 € M6 69 6.5 10 13 99.90 …0001 ​ (W050) M l1 mm d1 mm d2 mm d3 mm 3069 Order No. SK 40 € M6 94 6.5 10 13 113.50 …0004 ​ (W050) Clamping chuck for screw-in cutters ISO 7388-1 AD/B ≤ 10 µm 3069 SK 40, balancing quality: G2.5 25000 min-1 3086 SK 50, balancing quality: G6.3 12000 min-1 Continued on next page M Tool holders 3.1

RkJQdWJsaXNoZXIy NTg4MTI=