FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/368 Design: With centre cut, suitable for drilling. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. The tool life increases with MQL or air cooling. The tool can either be used with a pivoted or straight spindle. Suitable for machining hardened materials up to 62 HRC. Note: Copy milling; cutting values preferred at ap = 0.1 x d1 and ae = 0.5 x d1. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – 200 160 – – – – – 150 80 80 2434 ∅ d1 = h8 mm Corner radius r ± 0.02 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm GEH. STEEL < 60 HRC fz mm 2434 Order No. € 3 0.5 5 21 2.7 57 6 0.03 55.60 …0305 4 0.5 6 21 3.7 57 6 0.035 55.60 …0405 5 0.5 8 21 4.7 57 6 0.038 55.60 …0505 6 1 9 21 5.7 57 6 0.04 60.20 …0610 8 1 12 27 7.7 63 8 0.05 75.80 …0810 10 1.5 15 32 9.5 72 10 0.07 102.50 …1015 12 1.5 18 38 11.5 83 12 0.08 139.00 …1215 16 2 24 44 15.5 92 16 0.1 229.50 …1620 (W221) Signum Torus cutter, for hard machining Solid carbide H 4 DIN 6535-HA 30° Signum Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 105 75 – – – – – – – – – – – 30 20 2381 ∅ d1 = 0/-0.03 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth GEH. STEEL < 60 HRC fz mm 2381 Order No. € 6 13 57 6 6 0.022 34.40 …0060 8 19 63 8 6 0.03 43.50 …0080 10 22 72 10 6 0.035 66.60 …0100 12 26 83 12 6 0.036 90.60 …0120 16 32 92 16 6 0.034 152.50 …0160 20 38 104 20 8 0.028 219.00 …0200 25 44 104 25 8 0.026 386.00 …0250 (W212) TiAlN Milling cutter, for hard machining Solid carbide H 6–8 DIN 6535-HA 45° HSC TiAlN Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=