FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/367 Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling. With corner radius to avoid notching effects on the workpiece. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 120 75 – – – 125 – – – – – – 45 – 25 2436 ∅ d1 = 0/-0.03 mm Corner radius r mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm GEH. STEEL < 55 HRC f mm 2436 Order No. € 3 0.3 4 7 2.8 50 6 0.004 35.40 …0300 4 0.4 5 9 3.7 50 6 0.005 34.60 …0400 5 0.5 6 12 4.6 50 6 0.008 35.40 …0500 6 0.6 7 14 5.6 55 6 0.01 34.60 …0600 8 0.8 10 18 7.4 60 8 0.016 45.40 …0800 10 1 12 25 9.4 70 10 0.017 65.70 …1000 (W212) TiAlN Torus cutter, for hard machining Solid carbide H 4 DIN 6535-HA 30° HSC TiAlN Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling. With corner radius to avoid notching effects on the workpiece. Suitable for HSC machining up to 70 HRC. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 80 50 – – – 80 – – – – – – 30 – 20 2437 ∅ d1 = 0/-0.03 mm Corner radius r mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm GEH. STEEL < 55 HRC f mm 2437 Order No. € 3 0.3 12 50 6 0.006 44.60 …0300 4 0.3 15 50 6 0.008 44.60 …0400 5 0.3 20 60 6 0.011 43.70 …0500 6 0.5 20 60 6 0.013 44.60 …0602 8 0.3 25 70 8 0.017 55.90 …0800 8 0.5 25 70 8 0.017 55.90 …0802 10 0.5 30 90 10 0.021 84.60 …1002 12 0.5 30 90 12 0.021 116.00 …1202 20 1.5 55 110 20 0.023 383.00 …2006 20 2 55 110 20 0.023 383.00 …2008 (W212) TiAlN Torus cutter, for hard machining Solid carbide H 4 DIN 6535-HA 30° HSC TiAlN 0 Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=