FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/366 ∅ d1 = h8 mm Radius r ±0.015 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm GEH. STEEL < 60 HRC fz mm 2423 Order No. € 0.5 0.25 0.75 10 0.4 38 3 0.01 59.00 …0050 0.8 0.4 1.2 10 0.7 38 3 0.012 59.00 …0080 1 0.5 1.5 10 0.9 38 3 0.015 52.40 …0100 1.5 0.75 2.25 10 1.4 38 3 0.02 52.40 …0150 2 1 3 21 1.9 57 6 0.025 51.10 …0200 3 1.5 5 21 2.7 57 6 0.03 52.40 …0300 4 2 6 21 3.7 57 6 0.035 55.10 …0400 5 2.5 8 21 4.7 57 6 0.038 55.10 …0500 6 3 9 21 5.7 57 6 0.04 55.60 …0600 8 4 12 27 7.7 63 8 0.05 70.10 …0800 10 5 15 32 9.5 72 10 0.07 94.70 …1000 12 6 18 38 11.5 83 12 0.08 127.00 …1200 16 8 24 44 15.5 92 16 0.1 215.00 …1600 (W221) Signum Design: With centre cut, suitable for drilling. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. The tool life increases with MQL or air cooling. The tool can either be used with a pivoted or straight spindle. Note: Copy milling; cutting values preferred at ap = 0.05 x d1 and ae = 0.1 x d1. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – 200 160 – – – – – 200 100 80 2423 Ball nose slot drill, for hard machining Solid carbide H 2 DIN 6535-HA 30° HSC Signum Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=