Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/365 Design: With centre cut, suitable for drilling. Application: Can be used for copy milling. The neck chip channel makes optimum tool range possible and thus makes it suitable for mould-making applications. The tool life increases with MQL or air cooling. The tool can either be used with a pivoted or straight spindle. Suitable for HSC machining up to 70 HRC. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – 235 – – – – – – – – – – 230 225 155 2422 ∅ d1 = 0/-0.012 mm Radius r mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm GEH. STEEL < 60 HRC fz mm 2422 Order No. € 0.5 0.25 0.7 – – 40 4 0.019 43.20 …2050 1 0.5 1.5 3 0.95 50 6 0.038 44.90 …2100 1.5 0.75 2 4 1.45 50 6 0.042 40.30 …2150 2 1 2.5 5 1.95 50 6 0.045 40.30 …2200 3 1.5 4 10 2.85 60 6 0.067 40.30 …2300 4 2 5 10 3.85 60 6 0.09 40.30 …2400 5 2.5 6 12 4.85 60 6 0.113 43.50 …2500 6 3 7 15 5.85 60 6 0.125 44.40 …2600 8 4 9 15 7.7 80 8 0.134 72.90 …2800 10 5 11 25 9.7 80 10 0.144 120.50 …3000 (W212) TiAlN-S Ball nose slot drill, for hard machining Solid carbide H 2 DIN 6535-HA 30° HSC TiAlN-S Spiral drill grinding gauge for controlling the cutting edges on spiral drills with 118° point angle. Can be found on Ç 4/131. 10 Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=