Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/369 Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 40 30 – – – 40 – – – – – – 25 – 20 2380 ∅ d1 = 0/-0.03 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm GEH. STEEL < 55 HRC f mm 2380 Order No. € 6 26 70 6 0.03 44.60 …0600 8 36 90 8 0.038 60.10 …0800 10 46 100 10 0.046 93.50 …1000 12 56 110 12 0.051 131.00 …1200 16 66 130 16 0.053 228.50 …1600 20 76 140 20 0.06 358.00 …2000 25 92 180 25 0.064 656.00 …2500 (W212) TiAlN Milling cutter, for hard machining Solid carbide H 6 DIN 6535-HA 45° HSC TiAlN Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling, trimming and high-precision finishing. The extremely high helical pitch and reinforced core results in particularly smooth running and thus low deviation in shape and a very good surface on the workpiece. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – 85 200 160 – – – – – 55 55 45 2385 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth GEH. STEEL < 55 HRC fz mm 2385 Order No. € 3 8 57 6 6 0.003 63.60 …0300 4 11 57 6 6 0.009 59.00 …0400 5 13 57 6 6 0.009 56.90 …0500 6 13 57 6 6 0.011 56.90 …0600 8 19 63 8 6 0.016 64.60 …0800 10 22 72 10 6 0.021 112.50 …1000 12 26 83 12 6 0.026 152.50 …1200 16 32 92 16 6 0.032 269.50 …1600 20 38 104 20 8 0.038 385.00 …2000 (W221) Signum Milling cutter, for hard machining Solid carbide H 6–8 DIN 6527 DIN 6535-HA 55° HSC Signum l 2 l 1 d2 d1 Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=