FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/361 Design: With core fissure and core reinforcement, centre cut, suitable for drilling. Surface polished. Application: Tools with a cutting length of 5 x D are core reinforced and are suitable for keyway/roughing of ap = 1 x D, HPC-roughing and smoothing over the entire cutting length. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 250 200 130 – – – – 2370 ∅ d1 = e8 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Corner chamfer 45° mm ALU < 8% Si fz mm 2370 Order No. € 6 30 75 6 0.05 0.035 54.60 …0604 8 40 86 8 0.1 0.045 61.20 …0804 10 50 100 10 0.1 0.06 101.50 …1004 12 60 120 12 0.15 0.08 152.50 …1204 16 80 150 16 0.15 0.09 269.50 …1604 20 100 175 20 0.15 0.1 432.50 …2004 ​ (W221) bright High-performance roughing end mill, alu, 5 x D Solid carbide W 3 DIN 6535-HA 39°/40°/41° bright Design: With centre cut, suitable for drilling. Application: Universal use tool for trimming, rough milling, slot cutting and finishing milling. The irregular helical pitch results in particularly smooth running and thus very good surface on the workpiece. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 250 200 130 – – – – 2455 ∅ d1 = h10 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm ALU < 8% Si fz mm 2455 Order No. € 4 11 21 3.7 57 6 0.026 39.00 …0400 5 13 21 4.7 57 6 0.026 39.00 …0500 6 13 21 5.5 57 6 0.033 39.00 …0600 8 19 27 7.5 63 8 0.047 44.60 …0800 10 22 32 9.2 72 10 0.059 74.60 …1000 12 26 38 11.2 83 12 0.072 103.50 …1200 16 32 44 15 92 16 0.088 171.50 …1600 20 38 54 19 104 20 0.1 285.00 …2000 ​ (W221) bright Milling cutters, with 40°/42°, helical pitch, aluminium Solid carbide W 4 DIN 6527 DIN 6535-HB 40°/42° bright Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=