All prices quoted are non-binding recommended prices. 1/362 Design: With centre cut, suitable for drilling, nano-polished. Application: Suitable for grooving, roughing and smoothing in aluminium and aluminium alloys. Low in vibrations due to nano-polished cutting with micro support chamfers. Traverse cutting with cross-grinding, with reinforced cutting and more chipping space for drill and chamfer milling. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – 280 224 – 240 190 130 – – – – 2429 ∅ d1 = e8 mm Corner radius r ± 0.01 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm ALU < 8% Si fz mm 2429 Order No. € 6 0.5 13 20 5.7 57 6 0.05 49.00 …0605 6 1 13 20 5.7 57 6 0.05 49.00 …0610 8 0.5 19 26 7.7 63 8 0.065 53.50 …0805 8 1 19 26 7.7 63 8 0.065 53.50 …0810 10 0.5 22 30 9.5 72 10 0.08 89.10 …1005 10 1 22 30 9.5 72 10 0.08 89.10 …1010 10 1.5 22 30 9.5 72 10 0.08 89.10 …1015 12 1 26 36 11.5 83 12 0.12 129.00 …1210 12 1.5 26 36 11.5 83 12 0.12 129.00 …1215 12 2 26 36 11.5 83 12 0.12 129.00 …1220 12 2.5 26 36 11.5 83 12 0.12 129.00 …1225 12 3 26 36 11.5 83 12 0.12 129.00 …1230 12 4 26 36 11.5 83 12 0.12 129.00 …1240 16 1 32 42 15.5 92 16 0.15 219.50 …1610 16 2 32 42 15.5 92 16 0.15 219.50 …1620 16 2.5 32 42 15.5 92 16 0.15 219.50 …1625 16 3 32 42 15.5 92 16 0.15 219.50 …1630 16 4 32 42 15.5 92 16 0.15 219.50 …1640 20 1 38 52 19.5 104 20 0.18 343.00 …2010 20 2 38 52 19.5 104 20 0.18 343.00 …2020 20 2.5 38 52 19.5 104 20 0.18 343.00 …2025 20 3 38 52 19.5 104 20 0.18 343.00 …2030 20 4 38 52 19.5 104 20 0.18 343.00 …2040 (W221) bright Ratio mill, for aluminium machining Solid carbide W 3 DIN 6535-HA 39°/40°/41° bright Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=