FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/360 Design: With core fissure and core reinforcement, centre cut, suitable for drilling. Surface polished. Application: Tools with a cutting length of 3 x D are core reinforced and are suitable for keyway/roughing of ap = 1 x D, HPC-roughing and smoothing over the entire cutting length. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 250 200 130 – – – – 2370 ∅ d1 = e8 mm Cutting length l2 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm Corner chamfer 45° mm ALU < 8% Si fz mm 2370 Order No. € 5 15 4.7 57 6 0.05 0.03 41.80 …0502 6 18 5.7 65 6 0.05 0.04 41.80 …0602 8 24 7.7 75 8 0.1 0.05 46.80 …0802 10 30 9.5 80 10 0.1 0.065 77.90 …1002 12 36 11.5 93 12 0.15 0.08 117.00 …1202 16 48 15.5 108 16 0.15 0.095 208.00 …1602 20 60 19.5 126 20 0.15 0.11 332.00 …2002 ​ (W221) bright High-performance roughing end mill, alu, 3 x D Solid carbide W 3 DIN 6535-HA 39°/40°/41° bright Design: With core fissure and core reinforcement, centre cut, suitable for drilling. Surface polished. Application: Tools with a cutting length of 4 x D are core reinforced and are suitable for keyway/roughing of ap = 1 x D, HPC-roughing and smoothing over the entire cutting length. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 250 200 130 – – – – 2370 ∅ d1 = e8 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Corner chamfer 45° mm ALU < 8% Si fz mm 2370 Order No. € 6 24 65 6 0.05 0.05 50.20 …0603 8 32 75 8 0.1 0.08 55.60 …0803 10 40 100 10 0.1 0.1 94.70 …1003 12 48 100 12 0.15 0.12 140.50 …1203 16 64 125 16 0.15 0.15 249.50 …1603 20 80 150 20 0.15 0.17 399.00 …2003 ​ (W221) bright High-performance roughing end mill, alu, 4 x D 39°/40°/41° bright ​ ​ Solid carbide W ​ 3 ​ ​ DIN 6535-HA ​ ​ ​ O O G G O G Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=