FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/359 Design: With centre cut, suitable for drilling. Surface polished. Application: Ideal for HPC machining. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 240 190 130 – – – – 2370 ∅ d1 = e8 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm ALU < 8% Si fz mm 2370 Order No. € 3 8 15 2.7 57 6 0.01 35.10 …0300 4 11 18 3.7 57 6 0.01 31.70 …0400 5 13 18 4.7 57 6 0.02 31.70 …0500 6 13 20 5.5 57 6 0.025 35.10 …0600 8 21 26 7.5 63 8 0.032 39.00 …0800 10 22 30 9.2 72 10 0.039 65.70 …1000 12 26 36 11.2 83 12 0.048 96.90 …1200 16 36 42 15 92 16 0.058 172.50 …1600 20 41 52 19 104 20 0.073 278.50 …2000 ​ (W221) bright High-performance cutter, alu Solid carbide W 3 DIN 6535-HA 39°/40°/41° bright Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling and drill cutting. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 160 130 80 – – – – 2477 ∅ d1 = e8 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm ALU < 8% Si fz mm 2477 Order No. € 3 4 50 6 0.02 16.60 …0300 4 5 54 6 0.035 18.95 …0400 5 6 54 6 0.048 19.10 …0500 6 7 54 6 0.069 17.70 …0600 8 9 58 8 0.108 27.30 …0800 10 11 66 10 0.164 41.10 …1000 12 12 73 12 0.243 57.60 …1200 16 32 92 16 0.2 102.50 …1600 20 38 104 20 0.238 173.00 …2000 ​ (W210) bright Milling cutter, alu Solid carbide W 2 DIN 6535-HB 45° bright O O G G O G Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=