FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/358 Design: With one cutting edge. Flute finest cut (mirror cut). Application: Suitable for contour and plunge milling as well as milling out slots and notches on windows, doors and other profiles made of aluminium and plastic. Also suitable for other non-ferrous metals under certain conditions. Note: The HSC (high-speed machining) process enables you to achieve a significantly higher cutting speed as well as a significantly higher feed rate compared to conventional machining processes. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 180 – – – – – – 2310 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm ALU < 8% Si fz mm 2310 Order No. € 2 10 40 2 0.052 27.30 …0200 3 12 40 3 0.089 27.30 …0300 4 15 40 4 0.126 27.80 …0400 5 16 50 5 0.157 28.50 …0500 6 20 57 6 0.188 29.80 …0600 8 22 63 8 0.265 38.50 …0800 10 25 72 10 0.349 61.60 …1000 12 35 83 12 0.419 90.20 …1200 ​ (W210) bright Single tooth milling cutter, alu Solid carbide W 1 DIN 6535-HA 30° HSC bright Design: With centre cut, suitable for drilling. Application: Can be used for milling keyways and fitted key grooves as well as for universal machining. Also suitable for trimming and finishing milling. Milling cutter, alu 2 Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – – – – – – – – – 163 – – – – – – 2479 ∅ d1 = 0/-0.03 mm Radius r mm Neck grinding l3 mm Neck ∅ d3 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm ALU < 8% Si fz mm 2479 Order No. € 2 0.2 6 1.9 3 40 3 0.022 15.15 …0200 3 0.2 8 2.9 4 40 3 0.035 15.15 …0300 4 0.2 12 3.8 5 50 4 0.046 16.45 …0400 5 0.2 14 4.8 8 50 5 0.05 17.25 …0500 6 0.2 18 5.7 8 65 6 0.058 27.20 …0600 8 0.2 22 7.7 10 70 8 0.09 30.90 …0800 10 0.2 28 9.7 14 80 10 0.11 47.00 …1000 12 0.2 35 11.5 16 90 12 0.135 66.10 …1200 16 0.2 40 15.5 20 90 16 0.156 114.50 …1600 20 0.2 50 19.5 25 100 20 0.2 184.00 …2000 ​ (W212) bright bright ​ Solid carbide ​ W ​ 2 ​ ​ DIN 6535-HA ​ 25° ​ ​ ​ l 2 l 1 d2 d1 Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=