All prices quoted are non-binding recommended prices. 1/336 Design: With centre cutting. Application: Can be used for peripheral milling as well as for universal machining. Can also be used for trimming and finishing milling. The irregular helical pitch results in particularly smooth running and thus very good surface on the workpiece. High machining performance. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 200 160 130 115 80 70 115 65 60 – – – – – – – 1949 200 160 130 115 80 70 115 65 60 – – – – – – – 1950 End mill, with 35°/38°, helical pitch m 1950 TiAlN 1949 TiAlN Solid carbide N 4 35°/38° ∅ d1 = h10 mm Cutting length l2 mm Neck grinding l3 mm Neck ∅ d3 mm Total length l1 mm Shank ∅ d2 = h6 mm Corner chamfer 45° mm STEEL < 1000 N/mm2 fz mm 1949 1950 Order No. € € 1949 1950 1949 1950 4 6 10 – 3.8 – 40 6 0.2 0.018 20.30 20.30 …0400 6 8 12 – 5.6 – 40 6 0.2 0.027 20.30 20.30 …0600 8 12 16 – 7.5 – 50 8 0.25 0.036 26.40 26.40 …0800 10 13 20 – 9.5 – 50 10 0.25 0.05 37.20 37.20 …1000 12 15 24 – 11.5 – 50 12 0.25 0.059 48.00 48.00 …1200 (W201) (W201) TiAlN TiAlN Set content ∅ mm 1949 1950 Order No. Shank HA Shank HB € € 4; 6; 8; 10; 12 152.50 152.50 …1899 (W201) (W201) TiAlN TiAlN O O G G O G DIN 6535-HB DIN 6535-HA Sustainable cartridge made of organic material: • Made of glucose, minerals, natural fibres and waxes • Closed CO2 cycle and recyclable • Mainly without finitely available petroleum • Properties are comparable to polypropylene • Box comprises up to 93% renewable raw materials End mill set, 35°/38°, helical pitch m Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=