FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/337 Design: Unevenly twisted and unevenly pitched, cutting tips with 45° corner cutting chamfer with extended flutes. Application: Universally applicable for roughing, smoothing and large cutting depths with utmost machining performance at very regular run. The dynamic rotation allows HPC application with increased cutting values at ideal chipping values. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 230 140 – – – – 160 – – – – – – – – – 2797 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Corner chamfer 45° mm STEEL < 1000 N/mm2 fz mm 2797 Order No. € 3 8 57 6 0.1 0.028 16.15 …0300 4 11 57 6 0.1 0.035 15.50 …0400 5 13 57 6 0.15 0.035 16.95 …0500 6 13 57 6 0.2 0.04 17.65 …0600 8 19 63 8 0.2 0.05 24.00 …0800 10 22 72 10 0.2 0.07 31.50 …1000 12 26 83 12 0.3 0.09 43.90 …1200 14 26 83 14 0.3 0.11 66.00 …1400 16 32 92 16 0.3 0.13 69.20 …1600 18 32 92 18 0.4 0.15 102.00 …1800 20 38 104 20 0.4 0.17 107.00 …2000 ​ (W201) TiAlN HPC end mill, 35°/38°, helical pitch, FORMAT GT, UNI Solid carbide UNI 3 DIN 6535-HB 35°/38° HPC 45° TiAlN Set content ∅ mm 2797 Order No. € 6; 8; 10; 12 123.00 …0001 ​ (W201) TiAlN HPC end mill set, 35°/38°, helical pitch, FORMAT GT, UNI TiAlN Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=