Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/335 Application: For undercuts and for pre-finishing and finishing narrow contours. The machining narrow radii. Variable positioning angles possible. Form-free surface. Better surface quality by increasing the line spacing ae. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 190 150 130 80 100 80 135 135 – – – – – 120 – – 1922 190 150 130 80 100 80 135 135 – – – – – 120 – – 1928 ∅ D1 mm Cutting edge length L2 mm Total length L1 mm Shank ∅ D2 = h6 mm R1 mm R2 mm STEEL < 1000 N/mm2 fz mm 1922 1928 Order No. € € 2 24 70 8 1 95 0.048 153.50 139.50 …0200 4 28 83 12 2 90 0.072 210.00 191.50 …0400 6 30 105 16 3 80 0.096 300.00 283.00 …0600 (W201) (W201) SUPRA Bright Arc milling cutter, FORMAT GT, tangential Solid carbide N 4 DIN 6535-HA 1928 Bright 1922 SUPRA Application: For undercuts and for pre-finishing and finishing narrow contours. The machining narrow radii. Variable positioning angles possible. Form-free surface. Better surface quality by increasing the line spacing ae. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 190 150 130 80 100 80 135 135 – – – – – 120 – – 1929 190 150 130 80 100 80 135 135 – – – – – 120 – – 1930 190 150 130 80 100 80 135 135 – – – – – 120 – – 1931 190 150 130 80 100 80 135 135 – – – – – 120 – – 1932 ∅ D1 mm Cutting edge length L2 mm Total length L1 mm Shank ∅ D2 = h6 mm R1 mm R2 mm R3 mm STEEL < 1000 N/mm2 fz mm 1929 1930 1931 1932 Order No. € € € € 1929 1930 1931 1932 1929 1930 1931 1932 2 1010–– 75 8 1 300300– – 1 0.048 157.00 143.00 – – …0200 4 14 14 – – 100 12 2 450450– – 2 0.072 220.50 201.00 – – …0400 6 18 18 12 12 120 16 3 1200 1200 800 800 3 0.096 329.00 311.50 329.00 311.50 …0600 8 16 16 11 11 120 16 4 1200 1200 800 800 4 0.096 329.00 311.50 329.00 311.50 …0800 (W201) (W201) (W201) (W201) SUPRA Bright SUPRA Bright Arc milling cutter, FORMAT GT, conical Solid carbide N 4 DIN 6535-HA 1930/ 1932 Bright 1929/ 1931 SUPRA Solid carbide milling cutters 1.9
RkJQdWJsaXNoZXIy NTg4MTI=