FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/326 Design: With centre cut, suitable for drilling. Application: Can be used for rough milling. The fine cord toothing produces small chips which do not stick. This improves tool life and achieves a better surface finish. Universal use tool. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 300 235 160 – – 295 – – – – – – 65 – 45 2393 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth INOX ferrite/martens. fz mm 2393 Order No. € 6 16 57 6 3 0.023 43.90 …0600 8 16 63 8 3 0.03 50.20 …0800 10 22 72 10 4 0.028 76.60 …1000 12 26 83 12 4 0.034 96.20 …1200 16 32 92 16 4 0.039 160.50 …1600 20 38 104 20 4 0.038 258.00 …2000 (W212) TiAlN Roughing end mill Solid carbide INOX 3–4 DIN 6535-HB 20° HSC TiAlN Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 294 234 158 – – – – 158 – – – – – – – 2397 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth INOX ferrite/martens. fz mm 2397 Order No. € 6 16 57 6 3 0.013 42.90 …0600 8 16 63 8 3 0.018 50.20 …0800 10 22 72 10 4 0.017 76.60 …1000 12 26 83 12 4 0.02 98.50 …1200 16 32 92 16 4 0.024 156.50 …1600 20 38 104 20 4 0.024 258.00 …2000 (W212) TiAlN Roughing end mill Solid carbide INOX 3–4 DIN 6535-HB 30° TiAlN Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=