FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/327 Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 150 110 90 85 – – 150 100 – – – – – – – – 2404 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth STEEL < 1000 N/mm2 fz mm 2404 Order No. € 4 8 57 6 3 0.015 31.60 …0400 5 13 57 6 3 0.025 31.60 …0500 6 13 57 6 4 0.025 31.60 …0600 8 16 63 8 4 0.035 35.20 …0800 10 22 72 10 4 0.052 54.90 …1000 12 26 83 12 4 0.052 69.20 …1200 16 32 92 16 4 0.07 104.00 …1600 20 38 104 20 4 0.084 164.00 …2000 (W033) AlTiN+ Roughing end mill Solid carbide HR DIN 6527 3–4 DIN 6535-HB 45° 45° AlTiN+ Design: With centre cut, suitable for drilling. Application: Can be used for rough milling. The fine cord toothing produces small chips which are easy to remove. This improves tool life and achieves a better surface finish. Universal use tool. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 290 235 160 – – – – 160 – – – – – – – 2398 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth INOX ferrite/martens. fz mm 2398 Order No. € 6 7 54 6 4 0.01 40.80 …0600 8 9 58 8 4 0.013 47.70 …0800 10 14 66 10 4 0.017 69.70 …1000 12 16 73 12 4 0.02 89.50 …1200 16 22 82 16 5 0.019 146.00 …1600 20 26 92 20 6 0.015 234.50 …2000 (W212) TiAlN Roughing end mill Solid carbide HR 4–6 DIN 6535-HB 45° TiAlN Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=