FORMAT_EN_2023-25_WCT_Light

Additional freight charges may apply for articles over 110 cm. Articles marked with ◊ are not stock items, they are procured at short notice. 1/325 Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling as well as for universal machining. Can also be used for trimming and finishing milling. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] – 107 107 54 – – – – 54 – – – – – – – 2377 ∅ d1 = 0/-0.03 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm INOX ferrite/martens. fz mm 2377 Order No. € 2 6 40 6 0.002 30.80 …0200 2.5 8 40 6 0.003 30.80 …0250 3 8 45 6 0.005 31.50 …0300 3.5 10 45 6 0.006 30.80 …0350 4 11 45 6 0.012 30.80 …0400 4.5 11 45 6 0.014 30.80 …0450 5 13 50 6 0.018 31.50 …0500 5.5 13 50 6 0.02 31.50 …0550 6 13 50 6 0.022 31.50 …0600 (W212) ∅ d1 = 0/-0.03 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm INOX ferrite/martens. fz mm 2377 Order No. € 8 19 60 8 0.03 40.40 …0800 8.5 19 70 10 0.03 59.70 …0850 10 22 70 10 0.03 59.70 …1000 12 26 75 12 0.03 81.90 …1200 14 26 85 16 0.03 133.00 …1400 16 32 100 16 0.03 136.00 …1600 20 38 105 20 0.03 220.00 …2000 25 45 120 25 0.03 360.50 …2500 (W212) TiAlN TiAlN Milling cutter Solid carbide INOX 4 DIN 6535-HB 35° TiAlN Design: With centre cut, suitable for drilling. Application: Can be used for peripheral milling, trimming and high-precision finishing. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. A much longer tool life is achieved than with conventional tools. Universal tool. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 170 152 122 90 72 58 200 160 105 450 360 220 – 55 – – 2485 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth STEEL < 1000 N/mm2 fz mm 2485 Order No. € 6 30 75 6 6 0.031 47.30 …0600 8 40 100 8 6 0.042 54.80 …0800 10 40 100 10 6 0.05 97.50 …1000 12 45 150 12 6 0.059 135.00 …1200 16 65 150 16 6 0.071 243.50 …1600 20 65 150 20 8 0.09 365.50 …2000 25 75 150 25 10 0.13 1030.00 …2500 (W220) Fire Milling cutter Solid carbide INOX 6–10 DIN 6535-HA 45° Fire Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=