FORMAT_EN_2023-25_WCT_Light

All prices quoted are non-binding recommended prices. 1/324 Application: Can be used for peripheral milling, trimming and high-precision finishing. The high 45° helical pitch results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 120 100 80 90 – – 120 – – 600 400 – – – – – 2374 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth STEEL < 1000 N/mm2 fz mm 2374 Order No. € 6 26 70 6 6 0.05 21.00 …0600 8 36 90 8 6 0.03 25.00 …0800 10 46 100 10 6 0.03 43.10 …1000 12 56 110 12 6 0.052 51.40 …1200 16 66 130 16 6 0.06 108.50 …1600 20 76 140 20 8 0.08 143.00 …2000 (W033) AlTiN+ Milling cutter Solid carbide N 6–8 DIN 6535-HA 45° HSC AlTiN+ Application: Can be used for peripheral milling, trimming and high-precision finishing. The high 45° helical pitch results in particularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools. Universal tool. Use STEEL INOX CAST SPEC. ALLOY NON-FERROUS METAILS HARDENED STEEL Order No. < 700 N/mm2 < 1000 N/mm2 < 1400 N/mm2 ferrite/ martens. Austenitic Duplex GG/ GTS GGG Titanium > 850 N/mm2 Alu < 8% Si Alu > 8% Si Copper/ copper-alloy Graphite GFK/CFK/ Duropl. < 55 HRC < 60 HRC > 60 HRC VC [m/min] 190 152 122 120 96 77 200 160 105 450 360 220 – 55 – – 2484 ∅ d1 = h10 mm Cutting length l2 mm Total length l1 mm Shank ∅ d2 = h6 mm Number of teeth STEEL < 1000 N/mm2 fz mm 2484 Order No. € 3 8 57 6 6 0.015 36.50 …0030 4 11 57 6 6 0.025 34.50 …0040 5 13 57 6 6 0.025 32.40 …0050 6 13 57 6 6 0.031 32.40 …0060 8 19 63 8 6 0.042 39.80 …0080 10 22 72 10 6 0.05 60.90 …0100 12 26 83 12 6 0.059 84.00 …0120 16 32 92 16 6 0.071 150.00 …0160 20 38 104 20 8 0.09 209.50 …0200 25 45 121 25 10 0.13 346.50 …0250 (W220) Fire Milling cutter Solid carbide NH 6–10 DIN 6527 DIN 6535-HA 45° Fire Solid carbide milling cutters 1.9

RkJQdWJsaXNoZXIy NTg4MTI=